Resources:
Datasheet
FT234XD-R USB 2.0 Full-Speed to Serial UART Interface IC with 3 Mbaud Data Rate and 12-Pin DFN Package
The FT234XD-R is a compact USB-to-serial UART interface IC from FTDI, designed to provide reliable communication between USB-enabled devices and asynchronous serial interfaces. Supporting data-transfer rates from 300 baud to 3 Mbaud, this single-chip solution converts USB 2.0 Full-Speed signals into UART communication without requiring USB-specific firmware development. Its integrated USB protocol handling, configurable UART settings, and compatibility with FTDI Virtual COM Port (VCP) and D2XX drivers make it well-suited for microcontroller programming, embedded systems, industrial communication, and USB-to-UART converter applications.
Designed for space-constrained PCB layouts, the FT234XD-R features a compact 3 x 3 mm 12-pin DFN package with integrated clock generation, eliminating the need for an external crystal. The device incorporates 2048 bytes of Multi-Time-Programmable (MTP) memory, 512-byte transmit and receive buffers, and configurable CBUS I/O functionality for flexible system integration. With a 5V supply, internal 3.3V and 1.8V regulators, USB battery-charging detection, and an operating temperature range of -40 to +85 deg C, it provides an efficient USB-to-serial connectivity solution for industrial equipment, development boards, and compact electronic devices.
Key Features
- USB-to-UART Conversion: Provides single-chip USB-to-asynchronous-serial communication for embedded devices and microcontroller applications.
- USB 2.0 Full-Speed Interface: Supports USB 2.0 Full-Speed communication at 12 Mbps for reliable connectivity with compatible USB hosts.
- High-Speed UART Communication: Supports serial data rates from 300 baud to 3 Mbaud for TTL-level UART communication.
- Integrated USB Protocol Handling: Manages USB communication internally without requiring USB-specific firmware development.
- Compact 12-Pin DFN Package: Features a 3 x 3 mm package for space-efficient PCB integration.
- Built-In MTP Memory: Includes 2048 bytes of Multi-Time-Programmable memory for device descriptors and CBUS configuration.
- Integrated Clock Generation: Eliminates the need for an external crystal and supports optional clock-output configuration.
- Dedicated Data Buffers: Incorporates 512-byte transmit and 512-byte receive buffers with buffer-smoothing technology.
- FTDI Driver Support: Compatible with royalty-free Virtual COM Port (VCP) and Direct (D2XX) drivers.
- Configurable UART Settings: Supports 7-bit or 8-bit data, 1 or 2 stop bits, and odd, even, mark, space, or no parity.
- Flexible CBUS Functionality: Provides configurable CBUS I/O for application-specific control and status functions.
- LED Drive Support: Supports transmit and receive activity indications through configurable I/O functionality.
- Bit-Bang Interface Options: Supports synchronous and asynchronous bit-bang modes with RD# and WR# strobes.
- USB Battery-Charging Detection: Detects compatible higher-current USB charging sources for improved power-management decisions.
- Unique USB Serial Number: Supplied with a factory-programmed unique USB serial number for device identification.
- Flexible Power Configuration: Supports bus-powered, self-powered, and bus-powered systems with power switching.
- Configurable I/O Drive Strength: Supports output-drive settings from 4 mA to 16 mA.
- Low-Power Operation: Features typical active current of 8 mA and USB suspend current of 70 uA.
- Wide Operating Temperature: Supports operation from -40 to +85 deg C for industrial and embedded environments.
- RoHS-Compliant Construction: Available in a lead-free DFN package suitable for surface-mount assembly.
Applications
- USB-to-UART converter modules and adapter circuits
- Microcontroller programming and debugging interfaces
- Embedded systems and development boards
- Industrial serial communication equipment
- USB-based data acquisition systems
- UART communication with microcontrollers and FPGAs
- USB-to-RS232, RS422, and RS485 converter designs with suitable external transceivers
- Portable electronic devices and diagnostic equipment
- USB-enabled instrumentation and control systems
- Custom PCB designs requiring compact USB connectivity