Resources:
Datasheet
FT232HL-REEL USB 2.0 Hi-Speed to UART/FIFO Interface IC with MPSSE and 40 MB/s Synchronous FIFO
The FTDI FT232HL-REEL is a single-channel USB 2.0 Hi-Speed interface IC designed to bridge USB with UART, parallel FIFO, JTAG, SPI, I2C, FT1248, and other embedded interfaces. It supports USB Hi-Speed operation at 480 Mb/s and Full-Speed operation at 12 Mb/s while handling the complete USB protocol internally, reducing the need for USB-specific firmware development. In UART mode, the device supports serial transfer rates up to 12 Mbaud with full hardware handshaking and configurable data, stop-bit, and parity formats.
For higher-throughput applications, the FT232H supports asynchronous 245 FIFO transfer rates up to 8 MB/s and synchronous 245 FIFO rates up to 40 MB/s. Its Multi-Protocol Synchronous Serial Engine enables JTAG, I2C, SPI master, and bit-bang implementations, while additional modes include FT1248, fast serial, CPU-style FIFO, and asynchronous bit-bang. Integrated 3.3 V and 1.8 V regulation, configurable ACBUS pins, FTDI VCP/D2XX driver support, and optional external EEPROM configuration make the FT232HL suitable for industrial interfaces, programmers, debugging tools, FPGA systems, and high-speed embedded USB applications.
Key Features
- USB 2.0 Hi-Speed: Supports USB Hi-Speed operation at 480 Mb/s and Full-Speed operation at 12 Mb/s.
- Single-Channel Multipurpose Interface: Provides one configurable channel supporting UART, FIFO, MPSSE, FT1248, and other interface modes.
- Up to 12 Mbaud UART: Enables high-speed asynchronous serial communication for embedded and industrial applications.
- 40 MB/s Synchronous FIFO: Supports high-throughput parallel data transfer using synchronous 245 FIFO mode.
- 8 MB/s Asynchronous FIFO: Provides fast asynchronous parallel data transfer for compatible host systems.
- MPSSE Engine: Simplifies USB-to-JTAG, SPI master, I2C, and synchronous bit-bang interface development.
- Up to 30 Mbit/s MPSSE: Supports high-speed synchronous serial communication for programming, debugging, and peripheral control.
- FT1248 Interface: Supports a half-duplex proprietary interface with configurable 1-bit, 2-bit, 4-bit, or 8-bit bidirectional data buses.
- Full UART Handshaking: Supports modem and hardware flow-control signals for robust serial communication.
- Configurable UART Format: Supports 7-bit or 8-bit data, 1 or 2 stop bits, and odd, even, mark, space, or no parity.
- RS485 TX Enable: Dedicated TXDEN functionality simplifies automatic transmitter control in RS485 applications.
- External EEPROM Configuration: Optional EEPROM can store USB descriptors, interface mode settings, ACBUS functions, and electrical configuration.
- Configurable ACBUS Pins: Provides programmable auxiliary I/O functions for LEDs, clocks, control signals, and other system functions.
- Adjustable I/O Drive Strength: Supports 4 mA, 8 mA, 12 mA, or 16 mA output drive settings.
- Configurable Slew Rate: Allows output slew-rate optimisation for signal-integrity requirements.
- 3.3 V I/O with 5 V-Tolerant Inputs: Enables direct interfacing with many common MCU, FPGA, and logic systems.
- Integrated Regulators: On-chip regulation generates the internal 3.3 V and 1.8 V rails from a suitable supply.
- 12 MHz Clock Input: Uses an external 12 MHz crystal or oscillator for device clock generation.
- VCP Driver Support: FTDI Virtual COM Port drivers simplify UART applications using conventional serial-port software.
- D2XX Driver Support: Enables direct application access to FT232H functions and high-performance modes.
- Flexible USB Power Modes: Supports bus-powered, self-powered, and high-power bus-powered configurations.
- Industrial Temperature Range: Rated for operation from -40°C to +85°C.
- LQFP-48 Package: 48-pin package with a 7 x 7 mm body and 0.50 mm lead pitch.
- Tape-and-Reel Supply: FT232HL-REEL is supplied in production reels for automated PCB assembly.
Applications
- USB-to-UART interfaces
- USB-to-JTAG programmers
- USB-to-SPI interfaces
- USB-to-I2C interfaces
- FPGA programming tools
- MCU programming interfaces
- High-speed USB data acquisition
- USB FIFO interfaces
- Industrial control systems
- Test and measurement equipment
- Embedded debugging tools
- RS232 interfaces
- RS422 interfaces
- RS485 interfaces
- Logic analysers
- Protocol converters
- Development boards
- High-speed embedded communication systems