Resources:
Datasheet
FT232RNQ-REEL USB 2.0 Full-Speed to UART Interface IC with 3 Mbaud Serial and Integrated EEPROM
The FTDI FT232RNQ-REEL is a single-channel USB-to-UART interface IC designed to simplify USB connectivity in embedded systems, industrial equipment, development tools, instrumentation, and serial communication products. It provides a complete USB 2.0 Full-Speed interface on-chip and converts USB data to asynchronous UART without requiring developers to implement USB protocol firmware. The UART supports transfer rates from 300 baud to 3 Mbaud and configurable data, stop-bit, parity, and flow-control settings.
The device integrates a 1024-bit EEPROM for USB descriptors and CBUS configuration, USB termination resistors, internal clock generation, power-on reset, and AVCC filtering to reduce external component requirements. Its configurable UART and CBUS I/O levels support logic systems from 1.8 V to 5 V, while FTDI Virtual COM Port and D2XX drivers simplify software integration. The FT232RNQ-REEL is supplied in a compact 32-pin, 5 x 5 mm QFN package and is suitable for operation from -40°C to +85°C.
Key Features
- USB-to-UART Bridge: Converts USB 2.0 Full-Speed communication directly to asynchronous serial UART.
- USB 2.0 Full-Speed: Supports USB operation at up to 12 Mbps on the USB interface.
- Up to 3 Mbaud UART: Supports serial data rates from 300 baud to 3 Mbaud.
- Single UART Channel: Provides TXD, RXD, RTS#, CTS#, DTR#, DSR#, DCD#, and RI# serial signals.
- Integrated USB Protocol Engine: Handles USB protocol internally without requiring USB-specific firmware on the host MCU.
- 1024-Bit EEPROM: Stores USB descriptors, serial number, CBUS configuration, and device settings.
- Pre-Programmed USB Serial Number: Each device is supplied with a unique USB serial number.
- FTDIChip-ID Support: Provides a unique identification feature for device authentication and identification applications.
- Configurable CBUS Pins: Supports user-selectable CBUS functions for LEDs, clocks, power control, and GPIO functions.
- TX/RX LED Drive: CBUS pins can provide transmit and receive activity indication signals.
- 1.8–5 V UART I/O: Integrated level conversion supports interfacing with a wide range of MCU and FPGA logic levels.
- Internal 3.3 V Regulator: Provides the required USB I/O supply and supports compatible external circuitry.
- Integrated Clock Generator: Does not require an external crystal for normal operation.
- Optional Clock Output: Can provide a configurable clock output for external MCU or FPGA applications.
- 128-Byte RX Buffer: Receive FIFO helps maintain reliable serial data throughput.
- 256-Byte TX Buffer: Transmit FIFO with buffer smoothing supports sustained data transfer.
- UART Configuration: Supports 7 or 8 data bits, 1 or 2 stop bits, and odd, even, mark, space, or no parity.
- UART Signal Inversion: Allows selected UART signals to be logically inverted through configuration.
- Bit-Bang Modes: Supports synchronous and asynchronous bit-bang operation for general-purpose digital interfacing.
- VCP Driver Support: FTDI Virtual COM Port drivers allow the device to appear as a standard serial port.
- D2XX Driver Support: Direct FTDI driver access supports applications that do not use a conventional COM-port interface.
- Flexible Power Modes: Supports bus-powered, self-powered, and high-power bus-powered USB designs.
- Industrial Temperature Range: Rated for operation from -40°C to +85°C.
- Compact QFN Package: 32-pin 5 x 5 mm QFN package supports space-constrained PCB designs.
- RoHS-Compliant Package: Lead-free package suitable for modern production environments.
Applications
- USB-to-serial converters
- Embedded USB interfaces
- Microcontroller programming tools
- Debug interfaces
- Industrial equipment
- Test and measurement systems
- Data loggers
- USB instrumentation
- Serial communication adapters
- RS232 interface designs
- RS422 interface designs
- RS485 interface designs
- Development boards
- FPGA communication interfaces
- Point-of-sale equipment
- Embedded control systems