Resources:
Datasheet
FT230XQ-R USB 2.0 Full-Speed to UART Interface IC with 3 Mbaud Data Rate and 16-Pin QFN Package
The FT230XQ-R is a compact USB-to-serial UART interface IC from FTDI, designed to provide reliable communication between USB-enabled devices and asynchronous serial interfaces. Supporting USB 2.0 Full-Speed communication at 12 Mbps and UART data rates from 300 baud to 3 Mbaud, this single-channel interface controller simplifies USB connectivity for embedded systems. Its integrated USB protocol handling eliminates the need for USB-specific firmware development, making it well-suited for microcontroller programming, industrial communication equipment, USB-to-UART converters, and electronic instrumentation.
Designed for space-constrained PCB applications, the FT230XQ-R features a 4 x 4 mm 16-pin QFN package with integrated clock generation, eliminating the need for an external crystal. It incorporates 2048 bytes of configurable non-volatile memory, 512-byte transmit and receive buffers, and configurable CBUS I/O pins for flexible hardware integration. With support for FTDI Virtual COM Port (VCP) and D2XX drivers, USB battery-charger detection, and an operating temperature range of -40 to +85 deg C, the controller provides an efficient serial connectivity solution for embedded devices and industrial systems.
Key Features
- USB-to-UART Conversion: Provides single-channel USB-to-asynchronous-serial communication for embedded systems and microcontroller applications.
- USB 2.0 Full-Speed Interface: Supports USB communication at 12 Mbps for connectivity with compatible USB hosts.
- High-Speed UART Communication: Supports serial data rates from 300 baud to 3 Mbaud for efficient data transfer.
- Integrated USB Protocol Handling: Manages USB communication internally without requiring USB-specific firmware development.
- Compact QFN Package: Features a 16-pin, 4 x 4 mm QFN package for space-efficient PCB integration.
- Integrated Non-Volatile Memory: Includes 2048 bytes of Multi-Time-Programmable (MTP) memory for storing USB device descriptors and CBUS configuration.
- Built-In Clock Generation: Eliminates the need for an external crystal and supports optional clock-output functionality.
- Dedicated Data Buffers: Incorporates 512-byte transmit and 512-byte receive buffers with buffer-smoothing technology.
- FTDI Driver Compatibility: Supports Virtual COM Port (VCP) and Direct (D2XX) drivers for simplified software integration.
- Configurable UART Settings: Supports 7-bit or 8-bit data, 1 or 2 stop bits, and odd, even, mark, space, or no parity.
- Configurable CBUS I/O: Provides programmable CBUS functionality for application-specific control and status signals.
- LED Activity Indication: Supports transmit and receive LED drive signals for serial communication monitoring.
- Bit-Bang Interface Support: Offers synchronous and asynchronous bit-bang modes for additional digital interface applications.
- USB Battery-Charger Detection: Detects compatible USB charging sources to support power-management functionality.
- Factory-Programmed Serial Number: Includes a unique USB serial number for device identification.
- Flexible Power Configuration: Supports bus-powered, self-powered, and high-power bus-powered USB designs.
- Integrated Voltage Regulation: Includes internal 3.3V and 1.8V LDO regulators for device operation.
- Low-Power Consumption: Features approximately 8 mA typical active current and 125 uA typical USB suspend current.
- Wide Operating Temperature: Supports operation from -40 to +85 deg C for industrial and embedded applications.
- RoHS-Compliant Package: Supplied in a lead-free, surface-mount package suitable for automated PCB assembly.
Applications
- USB-to-UART converter modules and interface circuits
- Microcontroller programming and debugging interfaces
- Embedded systems and development boards
- Industrial serial communication equipment
- USB-based data acquisition and monitoring systems
- UART communication with microcontrollers and FPGAs
- USB-to-RS232, RS422, and RS485 converters with external transceivers
- USB-enabled instrumentation and diagnostic equipment
- Legacy serial peripheral upgrades
- Custom electronic devices requiring USB connectivity