FT2232HL-REEL - USB Bridge Dual Channel UART Interface IC LQFP-64

FTDI

No reviews yet Write a Review
SKU:
015-FT2232HL-REEL
MPN:
FT2232HL-REEL
Quantity
Unit Price (ex. GST)
Buy 1 - 9
₹ 1,276.61
Buy 10 - 99
₹ 1,212.78
Buy 100 - 999
₹ 1,148.95
Buy 1000 or above
₹ 1,021.29
FTDI FT2232HL-REEL USB 2.0 Hi-Speed dual-channel UART/FIFO bridge IC with 480 Mbps USB, dual MPSSE engines, 12 Mbaud UART and up to 40 MB/s synchronous FIFO transfer. Supplied in a 64-pin LQFP package. View full description
  • 100% Original Products
  • GST Invoice
  • Earn 3% Cashback
₹1,506.40 inc. GST
₹1,276.61 ex. GST
9 people looking at this.

Technical Specifications

Brand:
FTDI
Case/Package:
LFQFP
Mount:
Surface Mount
Number Of Pins:
64
Number of Terminals:
64
Data Rate:
60 Mbps
Dual Supply Voltage:
3.3 V
ESD Protection:
Yes
Features:
I2C
Max Operating Temperature:
85 C
Max Supply Voltage:
1.98 V
Min Operating Temperature:
-40 C
Min Supply Voltage:
1.62 V
Nominal Supply Voltage (DC):
1.8 V
Number of Channels:
2
Number of Transceivers:
4
Operating Supply Current:
70 mA
Operating Supply Voltage:
3.3 V
Temperature Grade:
Industrial

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

Resources:
Datasheet

FT2232HL-REEL USB 2.0 Hi-Speed Dual-Channel UART/FIFO Bridge Interface IC with Dual MPSSE Engines and 64-Pin LQFP Package

The FT2232HL-REEL is a high-performance USB-to-UART/FIFO bridge interface IC from FTDI, designed to provide flexible serial and parallel communication between USB-enabled devices and embedded electronic systems. Supporting USB 2.0 Hi-Speed communication at 480 Mbps, the controller features 2 independently configurable channels that can operate as UART, FIFO, or Multi-Protocol Synchronous Serial Engine (MPSSE) interfaces. With UART data rates up to 12 Mbaud and support for JTAG, SPI, I2C, and bit-bang communication, it is well-suited for microcontroller programming, FPGA development, industrial automation, debugging equipment, and USB-based communication systems.

Designed for high-speed data transfer and versatile hardware integration, the FT2232HL-REEL supports asynchronous FIFO communication up to 8 MB/s and single-channel synchronous FIFO transfers up to 40 MB/s. Its integrated USB protocol handling eliminates the need for USB-specific firmware development, while independent baud-rate generators, configurable I/O drive strength, and hardware or software flow control provide flexible interface configuration. The device also incorporates a 1.8V core regulator, power-on-reset circuitry, and an integrated clock-multiplier PLL. Operating with 3.3V I/O and 5V-tolerant inputs, the FT2232HL-REEL is available in a 64-pin LQFP package for industrial and embedded PCB applications.

Key Features

  • Dual-Channel USB Bridge: Provides 2 independently configurable serial or parallel interfaces through a single USB connection.
  • USB 2.0 Hi-Speed Interface: Supports USB Hi-Speed communication at 480 Mbps and Full-Speed operation at 12 Mbps.
  • Dual MPSSE Engines: Integrates 2 Multi-Protocol Synchronous Serial Engines for JTAG, SPI, I2C, and bit-bang applications.
  • High-Speed UART Communication: Supports UART data rates up to 12 Mbaud, depending on interface configuration and external circuitry.
  • Flexible Interface Configuration: Allows independent UART, FIFO, and MPSSE operation for different communication requirements.
  • High-Speed Parallel FIFO: Supports asynchronous FIFO transfers up to 8 MB/s.
  • Synchronous FIFO Mode: Provides single-channel synchronous FIFO data-transfer rates up to 40 MB/s.
  • CPU-Style FIFO Interface: Simplifies communication with external processors and embedded controllers.
  • MCU Host Bus Emulation: Supports configurable microcontroller-style host-bus communication.
  • Fast Opto-Isolated Interface: Provides an interface option for use with external opto-isolation circuitry.
  • Independent Baud-Rate Generators: Enables separate UART baud-rate configuration for each channel.
  • Integrated USB Protocol Handling: Manages USB communication internally without requiring USB-specific firmware development.
  • FTDI Driver Compatibility: Supports royalty-free Virtual COM Port (VCP) and Direct (D2XX) drivers.
  • Full UART Handshaking: Supports hardware handshaking, modem-control signals, and X-On/X-Off software flow control.
  • Configurable UART Settings: Supports 7-bit or 8-bit data, 1 or 2 stop bits, and odd, even, mark, space, or no parity.
  • RS485 Transmit Control: Includes TXDEN functionality for controlling compatible external RS485 transceivers.
  • Enhanced Bit-Bang Mode: Supports bit-bang operation with RD# and WR# control strobes.
  • Configurable Output Drive: Offers 4 mA, 8 mA, 12 mA, and 16 mA drive-strength settings with adjustable slew rates.
  • External EEPROM Support: Allows configuration of USB descriptors and operating settings through an external EEPROM.
  • Integrated Core Regulator: Includes an internal 1.8V LDO regulator and power-on-reset circuitry.
  • USB Bulk Transfer Support: Supports 512-byte USB bulk-transfer packets in Hi-Speed mode.
  • Flexible Power Configuration: Supports bus-powered, self-powered, and high-power bus-powered USB designs.
  • ESD Protection: Provides +/-2 kV HBM, +/-200V Machine Model, and +/-500V CDM ESD protection.
  • Industrial Temperature Range: Supports operation from -40 to +85 deg C.
  • Compact LQFP Package: Supplied in a lead-free 64-pin LQFP package for surface-mount PCB integration.

Applications

  • USB-to-dual-UART converter modules
  • Microcontroller programming and debugging interfaces
  • USB-to-JTAG programming and debugging tools
  • FPGA development and configuration systems
  • USB-to-SPI and USB-to-I2C interface adapters
  • High-speed USB-to-parallel FIFO converters
  • Industrial automation and control equipment
  • Embedded systems and development boards
  • USB-based data acquisition and monitoring systems
  • Production testing and electronic diagnostic equipment
  • USB-to-RS232, RS422, and RS485 converters with external transceivers
  • Custom communication and instrumentation systems