FT232RNL-REEL - USB Bridge to UART Interface IC SSOP-28

FTDI

No reviews yet Write a Review
SKU:
015-FT232RNL-REEL
MPN:
FT232RNL-REEL
Quantity
Unit Price (ex. GST)
Buy 1 - 9
₹ 753.46
Buy 10 - 99
₹ 715.79
Buy 100 - 999
₹ 678.11
Buy 1000 or above
₹ 602.77
FTDI FT232RNL-REEL USB 2.0 Full-Speed to UART bridge IC with 3 Mbaud data rate, 1024-bit EEPROM, 128-byte RX and 256-byte TX buffers, integrated clock and configurable I/O. Available in a 28-pin SSOP package. View full description
  • 100% Original Products
  • GST Invoice
  • Earn 3% Cashback
₹889.08 inc. GST
₹753.46 ex. GST
7 people looking at this.

Technical Specifications

Brand:
FTDI
Case/Package:
SSOP
Number of Terminals:
28
Ambient Temperature Range High:
85 C
Data Rate:
60 Mbps
Interface:
UART
Max Operating Temperature:
85 C
Max Supply Voltage:
5.25 V
Min Operating Temperature:
-40 C
Min Supply Voltage:
3.3 V
Nominal Supply Current:
7 mA
Number of Ports:
1
USB Standard:
USB 2.0
Height:
2 mm
Length:
10.2 mm
Terminal Pitch:
650 um
Width:
5.3 mm

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

Resources:
Datasheet

FT232RNL-REEL USB 2.0 Full-Speed to UART Bridge Interface IC with 3 Mbaud Data Rate and 28-Pin SSOP Package

The FT232RNL-REEL is a USB-to-UART bridge interface IC from FTDI, designed to provide reliable asynchronous serial communication between USB-enabled devices and embedded electronic systems. Supporting USB 2.0 Full-Speed communication and UART data rates from 300 baud to 3 Mbaud, this single-chip controller simplifies USB connectivity without requiring USB-specific firmware development. Its integrated USB protocol handling and compatibility with FTDI Virtual COM Port (VCP) and D2XX drivers make it well-suited for microcontroller programming, industrial communication equipment, USB-to-serial converters, and embedded system development.

Designed for flexible PCB integration, the FT232RNL-REEL features integrated clock generation, USB termination resistors, and a 1024-bit EEPROM for storing device descriptors and configurable CBUS settings. The IC incorporates a 128-byte receive buffer and a 256-byte transmit buffer with buffer-smoothing technology for efficient serial data transfer. Its configurable UART and CBUS logic levels support interfacing with 1.8V to 5V systems, while the 3.3-5.25V supply range and -40 to +85 deg C operating temperature support a wide range of industrial and embedded applications. The device is supplied in a 28-pin SSOP package with tape-and-reel packaging for surface-mount PCB assembly.

Key Features

  • USB-to-UART Bridge: Provides single-chip USB-to-asynchronous-serial communication for embedded systems and microcontroller applications.
  • USB 2.0 Full-Speed Support: Supports USB 2.0 Full-Speed communication at 12 Mbps for connectivity with compatible USB hosts.
  • High-Speed UART Communication: Supports serial data rates from 300 baud to 3 Mbaud for efficient asynchronous data transfer.
  • Integrated USB Protocol Handling: Manages the USB protocol internally, eliminating the need for USB-specific firmware development.
  • Built-In EEPROM: Includes 1024-bit EEPROM memory for storing USB device descriptors and CBUS I/O configuration.
  • Integrated USB Termination: Features built-in USB termination resistors to reduce external component requirements.
  • Internal Clock Generation: Eliminates the need for an external crystal and supports optional clock-output configuration.
  • Dedicated Data Buffers: Incorporates a 128-byte receive buffer and a 256-byte transmit buffer with buffer-smoothing technology.
  • FTDI Driver Compatibility: Supports royalty-free Virtual COM Port (VCP) and Direct (D2XX) drivers for simplified software integration.
  • Unique Device Identification: Features FTDI Chip ID technology and a factory-programmed unique USB serial number.
  • Configurable CBUS I/O: Provides programmable CBUS pins for application-specific control and status functions.
  • LED Activity Indication: Supports transmit and receive LED drive signals for monitoring serial communication.
  • Flexible UART Configuration: Supports 7-bit or 8-bit data, 1 or 2 stop bits, and odd, even, mark, space, or no parity.
  • Bit-Bang Interface Modes: Supports synchronous and asynchronous bit-bang operation with RD# and WR# strobes.
  • Flexible Logic-Level Interfacing: Supports UART and CBUS logic levels from 1.8V to 5V through an integrated level-conversion interface.
  • Configurable Output Drive: Allows adjustment of I/O output-drive strength for different circuit requirements.
  • Flexible USB Power Options: Supports bus-powered, self-powered, and high-power bus-powered USB configurations.
  • Integrated Power-On Reset: Includes a power-on-reset circuit and AVCC supply filtering for simplified hardware design.
  • UART Signal Inversion: Supports configurable UART signal inversion for application-specific communication requirements.
  • Wide Operating Temperature: Operates from -40 to +85 deg C for industrial and embedded environments.
  • Compact SSOP-28 Package: Available in a lead-free, RoHS-compliant 28-pin SSOP package for surface-mount assembly.

Applications

  • USB-to-UART converter modules and interface circuits
  • Microcontroller programming and debugging interfaces
  • Embedded systems and development boards
  • Industrial serial communication equipment
  • USB-based data acquisition and monitoring systems
  • USB-to-RS232, RS422, and RS485 converters with external transceivers
  • UART communication with microcontrollers and FPGAs
  • USB-enabled instrumentation and diagnostic equipment
  • Legacy serial device upgrades
  • Custom electronic equipment requiring USB connectivity