Resources:
Datasheet
W5500 3-in-1 Hardwired TCP/IP Ethernet Controller IC with 10/100 Mbps Ethernet MAC, PHY and High-Speed SPI Interface
The W5500 Ethernet Controller IC from WIZnet is a compact, hardwired TCP/IP networking solution designed to provide reliable Ethernet connectivity for embedded systems and microcontroller-based applications. Integrating a TCP/IP protocol stack, 10/100 Mbps Ethernet MAC, and PHY into a single chip, the W5500 simplifies network communication without requiring complex software-based TCP/IP processing. It supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols, making it well-suited for IoT devices, industrial automation, embedded servers, security systems, and network-enabled electronic equipment.
Designed for efficient integration, the W5500 features a high-speed SPI interface supporting clock frequencies up to 80 MHz, allowing easy communication with external microcontrollers. Its integrated 32 KB transmit and receive memory supports Ethernet packet processing, while 8 independent hardware sockets enable multiple simultaneous network connections. The controller also supports Wake-on-LAN (WOL), power-down mode, and automatic Ethernet speed and duplex negotiation for flexible networking applications. Operating from a 3.3V supply with 5V-tolerant digital I/O, the W5500 is available in a compact 48-pin LQFP package measuring 7 x 7 mm.
Key Features
- Integrated 3-in-1 Ethernet Controller: Combines a hardwired TCP/IP stack, 10/100 Mbps Ethernet MAC, and PHY in a single IC.
- Hardwired TCP/IP Protocol Support: Supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE for embedded networking applications.
- 8 Independent Hardware Sockets: Enables simultaneous management of up to 8 socket connections.
- High-Speed SPI Interface: Supports SPI clock frequencies up to 80 MHz for efficient communication with external microcontrollers.
- SPI Mode Compatibility: Supports SPI Mode 0 and Mode 3 for flexible integration with compatible MCU platforms.
- Integrated 32 KB Memory: Provides 32 KB of internal memory for Ethernet transmit and receive buffering.
- 10/100 Mbps Ethernet PHY: Supports 10BASE-T and 100BASE-TX Ethernet communication.
- Automatic Speed Negotiation: Supports auto-negotiation for 10/100 Mbps Ethernet and full-duplex or half-duplex operation.
- Reduced MCU Processing Requirements: Hardware-based TCP/IP processing reduces the need for software-based network protocol handling.
- Wake-on-LAN Support: Supports Wake-on-LAN functionality over UDP for network-triggered device activation.
- Power-Down Mode: Helps reduce power consumption when Ethernet communication is not required.
- 3.3V Power Supply: Operates from a 3.3V DC supply for integration into embedded electronic systems.
- 5V-Tolerant Digital I/O: Supports 5V input-signal tolerance for interfacing with compatible microcontrollers.
- Ethernet Status LED Outputs: Provides output signals for link status, speed, activity, and full-duplex or half-duplex indication.
- Compact LQFP-48 Package: Features a 48-pin, 7 x 7 mm lead-free package with 0.5 mm pin pitch for surface-mount PCB assembly.
- IP Fragmentation Limitation: Does not support IP fragmentation, which should be considered during network application development.
Applications
- IoT devices and Ethernet-enabled sensor networks
- Industrial automation and factory monitoring systems
- Home automation and smart building controllers
- Serial-to-Ethernet communication converters
- Embedded web servers and network control systems
- Access-control systems and network-enabled LED displays
- POS terminals, receipt printers, and network printers
- Security systems, DVRs, and network cameras
- Medical monitoring and diagnostic equipment
- Set-top boxes and digital media devices
- Ethernet-enabled microcontroller development boards
- Remote monitoring and data acquisition systems