Description
The 5G/4G/3G Raspberry Pi communication HAT utilizes the SIMCom 5G module SIM8200EA-M2. It supports both 5G NSA and SA networking and delivers impressive data rates of up to 2.4 Gbps (DL) / 500 Mbps (UL).
The HAT's base board is equipped with a standard M2 connector, making it compatible with various 4G or 5G communication modules with M2 packaging. Additionally, it includes other features such as a USB3.1 port, audio jack and decoder, SIM card slot, and more. With our configuration script and development resources, it's easy to enable high-speed 5G communication for the Raspberry Pi or computer. This HAT is perfect for quickly evaluating 5G modules and integrating into various applications that require a 5G connection.
-
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
-
Comes with SIM8200EA-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support.
-
5G/4G/3G communication support.
-
USB3.1 port for testing AT commands, sending messages, cloud communication, making a phone call, getting GNSS positioning data, etc.
-
SIM card slot, supports 1.8V / 3V SIM card.
-
2 x LED indicators, easy to monitor the working status.
-
AT command support, based on 3GPP TS 27.007, 27.005, and V.25TER command set.
-
Onboard audio jack and audio decoder, allow audio operation like making a phone call.
-
Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS.
-
Operating system support: Windows/Linux/Android.
-
Comes with quality acrylic case and cooling fan, nice looking, better heat dissipation.
- SIM8200EA-M2 x1
- SIMXXXX-M2 4G/5G HAT base x1
- 5G/4G/3G/2G External Antenna x5
- Power adapter 5V 3A Micro x1
- USB3.0 dual plug cable x1
- USB3.0 Adapter x1
- USB2.0 Adapter x1
- Black acrylic case panel x1
- 2×20PIN pin header x1
- 4010 cooling fan x1
- Screws pack x1
- GPS passive antenna x1
- Screwdriver x1
FAQs:
Q: What is the maximum data rate supported by the SIM8200EA-M2 5G HAT?
A: The SIM8200EA-M2 5G HAT supports data rates of up to 2.4 Gbps (download) and 500 Mbps (upload).
Q: What communication modules are compatible with the SIM8200EA-M2 5G HAT?
A: The SIM8200EA-M2 5G HAT is compatible with various 4G or 5G communication modules with M2 packaging.
Q: What operating systems does the SIM8200EA-M2 5G HAT support?
A: The SIM8200EA-M2 5G HAT supports Windows, Linux, and Android operating systems.
Q: Can I make phone calls and send SMS using the SIM8200EA-M2 5G HAT?
A: Yes, the SIM8200EA-M2 5G HAT allows you to use AT commands to make phone calls and send SMS.
Q: What are the application scenarios for the SIM8200EA-M2 5G HAT?
A: The SIM8200EA-M2 5G HAT is suitable for applications such as CPE (Customer Premises Equipment), Intelligent Gateway, UAV (Unmanned Aerial Vehicle), Live Video, Telemedicine, and Intelligent Security.
Specifications
Working frequency |
|
Sub-6G |
n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n40, n41, n66, n71, n77, n78, n79 |
LTE-FDD |
B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B29/B30/B66/B71 |
LTE-TDD |
B34/B38/B39/B40/B41/B42/B48 |
WCDMA |
B1/B2/B3/B4/B5/B8 |
GNSS |
GPS, GLONASS, BeiDou, Galileo and QZSS |
Data transmission |
|
Sub-6G |
2.4 Gbps (DL) / 500 Mbps (UL) |
LTE |
1 Gbps (DL) / 200 Mbps (UL) |
HSPA |
42 Mbps (DL) / 5.76 Mbps (UL) |
Software function |
|
Operating system |
Windows/Linux/Android |
Letter of agreement |
TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/MQTTS/DNS/SSL3.0 |
Text Message (SMS) |
Support MT, MO, CB, Text, PDU |
Firmware upgrade |
Supports firmware upgrade via USB interface |
Hardware Description |
|
SIM card |
1.8V/3.0V |
Antenna interface |
6 × IPEX-4 ports for 3G/4G/5G/GNSS |
Supply voltage |
5V 3A |
Application scenario |
|
Applicable area |
Countries or regions that cover the 5G Sub-6G frequency band, such as China, the United States, Japan and South Korea, Europe, the Middle East, and the Americas |
Typical application |
CPE/Intelligent Gateway/UAV/Live Video/Telemedicine/Intelligent Security |
SIM8200EA-M2 5G HAT FOR RASPBERRY PI
Comes With SIM8200EA-M2, Supports 5G/4G/3G, Supports 5G SA And NSA,
Multi Mode Multi Band, Applicable For Regions With 5G Sub-6G Signal Coverage
5G Module Comparison
Compatible Hardware Interface, Identical Software Function
Multi Mode Multi Band
Applicable For Most Of The Countries And Regions
Based on Qualcomm snapdragon X55 platform with multi mode multi band support.
Applicable for regions with 5G Sub-6G signal coverage including China, US, Japan, South Korea, Europe, the Middle East, Latin America...
Supports 5G NSA (4G+5G common networking) and SA (5G standalone networking).
Multi System Support
Supports Windows/Android/Linux
Just plug it into USB port, go through some driver installation and simple configuration, the high speed 5G network connection would be ready to use
Multi Host Support
Enabling 5G High Speed Connection For Raspberry Pi And Windows Computer
LET: up to 1 Gbps (downlink) / up to 200 Mbps (uplink)*
HSPA+: up to 42 Mbps (downlink) / up to 5.76 Mbps (uplink)*
Cloud Communication
Supported Communication Protocols:
TCP / IP / IPV4 / IPV6 / Multi-PDP / FTP / FTPS / HTTP / HTTPS / MQTTS / DNS / SSL3.0
Phone Call & SMS Support
Allows Using AT Commands To Make Phone Call Or Send SMS
Application Examples
More Possibilities
Setup Introduction
What's On Board
- Raspberry Pi GPIO header
- USB3.1 port
- Audio drive circuit
- Audio jack
- Reset
- Power switch
- 5V 3A input
- 5V to 3.3V translator
- 5V to 1.8V translator
- 5V to 4.3V translator
- Power indicator
- Network indicator
- M.2 connector
- SIM8200EA-M2
- Antenna connector
- Fan connector
- SIM card slot
Outline Dimensions