Description
The item being described is a LED matrix display that measures 64×64 and is capable of producing full-color graphics. It has 4096 RGB LEDs mounted on its surface with a 2mm pitch. The display is compatible with a variety of platforms including Raspberry Pi, Arduino, ESP32, and others. It comes with open source demos and tutorials that can assist makers or electronics enthusiasts who are just starting to learn. It is also appropriate for those interested in DIY secondary development for desktop or wall-mounted display applications.
-
4096 individual RGB LEDs, full-color display, adjustable brightness
-
64x64 pixels, 2mm pitch, allows displaying text, colorful image, or animation
-
128x128mm dimensions, moderate size, suitable for DIY desktop display or wall mount display
-
Onboard two HUB75 header, one for controller data input, one for output, chain support
-
Provides open source development resources (examples for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino)
-
RGB-Matrix-P2-64x64 LED matrix and accessories x1
-
Power supply terminal adapter x1
-
16P wire ~30cm x1
64x64 RGB LED Matrix Panel
4096 Individual RGB LEDs, 2mm Pitch
Supports Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino...
Header Definition
PIN | Description | PIN | Description | |
---|---|---|---|---|
+5V | 5V power input | GND | Ground | |
R1 | R higher bit data | R2 | R lower bit data | |
G1 | G higher bit data | G2 | G lower bit data | |
B1 | B higher bit data | B2 | B lower bit data | |
A | A line selection | B | B line selection | |
C | C line selection | D | D line selection | |
E | E line selection | CLK | Clock input | |
LAT/STB | Latch pin | OE | Output enable |
Note: The power port (VCC and GND) of the display is powered by 5V, do not connect to other voltages, so as not to burn out the display.
Chainable Design
Multi LED Matrix Panel Can Be Chained Together To Build A Larger Panel
Via HUB75 Input/Output Header
Applications
DIY Maker Desktop Or Wall Mount Display, Signboard, Environment Monitor...
Dimensions