NB-IoT HAT for Raspberry Pi - Waveshare

This Standard Raspberry Pi 40PIN GPIO Extension Header is designed to support Raspberry Pi series boards and Jetson Nano. It offers versatile communication protocols such as LWM2M, COAP, MQTT, TCP, UDP, HTTP, and HTTPS. The board features an onboard USB interface for power supply or debugging purposes. Additionally, it comes with breakout UART control pins, allowing seamless connection with host boards like Arduino and STM32. The onboard voltage translator operates at 3.3V by default but can be switched to 5V using the onboard jumper.

Accessories

•  SIM7020E NB-IoT HAT x1
•  Antenna x1
•  USB type A plug to micro plug cable x1
•  RPi screws pack (2pcs) x1

Features

•  Raspberry Pi connectivity, compatible with any revision
• Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.
• Onboard USB interface, for power supply OR debugging
• Breakout UART control pins, to connect with host boards like Arduino/STM32
• Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
• SIM card slot, supports NB-IoT specific card
• 2x LED indicators, easy to monitor the working status
• Baudrate: 300bps~921600bps (115200bps by default)
• Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32/Python)
• Weight: 0.08 kg
• Band - FDD-LTE B1/B3/B5/B8/B20/B28
• Data rate
  • Uplink<62.5Kbps
  • Downlink<26.15Kbps
• SMS - Text mode and PDU mode (depends on the NB card)
• Power supply: 5V
• Logic level: 5V/3.3V (3.3V by default)
• Overall current (idle mode): ~18mA
• Single module current (VBAT=3.3V):
  • Idle mode: 5.6mA
  • Sleep mode: 0.4mA
  • PSM mode: 5uA
  • eDRX mode: 70uA (eDRX=655.36s)
• Dimension: 30.5mm x 65.0mm

Resources

Wiki

Dimension