Resources:
Datasheet
DP83848IVVX/NOPB 10/100 Mbps Ethernet PHY Transceiver with MII/RMII, Auto-MDIX and Industrial Temperature Operation
The Texas Instruments DP83848IVVX/NOPB is a single-port 10/100 Mbps Ethernet physical-layer transceiver designed for industrial, embedded, transportation, automation, and communication systems. It supports IEEE 802.3 10BASE-T and 100BASE-TX Ethernet standards and provides configurable MII or RMII MAC interfaces for flexible connection to microcontrollers, processors, FPGAs, and Ethernet MACs. Automatic MDI/MDIX crossover detection simplifies network cabling by supporting either straight-through or crossover cables without manual configuration.
The DP83848I integrates auto-negotiation, adaptive equalisation, baseline-wander compensation, energy-detection mode, programmable LED outputs, packet BIST, and an IEEE 1149.1 JTAG interface. It operates from a 3.3 V supply with typical power consumption below 270 mW and is specified from -40°C to +85°C for industrial environments. Support for cable lengths up to 150 m under specified conditions, enhanced ESD protection, and a compact 48-pin LQFP package make it suitable for reliable wired networking in embedded and industrial designs.
Key Features
- 10/100 Mbps Ethernet PHY: Supports both 10BASE-T and 100BASE-TX Ethernet communication.
- IEEE 802.3 Compliance: Integrates compliant ENDEC, PCS, PMD, transmit, and receive functions for standard Ethernet networks.
- MII Interface: Supports standard IEEE 802.3 Media Independent Interface connectivity to Ethernet MACs.
- RMII Rev. 1.2 Support: Configurable Reduced Media Independent Interface reduces the number of host-interface pins required.
- Configurable SNI Interface: Supports a Serial Network Interface for 10 Mbps applications.
- Auto-MDIX: Automatically determines MDI or MDIX configuration, simplifying Ethernet cable selection.
- Auto-Negotiation: Automatically negotiates Ethernet speed and duplex mode with the connected link partner.
- Parallel Detection: Supports compatibility with link partners that do not implement auto-negotiation.
- Up to 150 m Cable Operation: Designed for error-free Ethernet operation at cable lengths up to 150 m under specified conditions.
- Adaptive Equalisation: Integrated TP-PMD receiver automatically compensates for cable-related signal attenuation.
- Baseline-Wander Compensation: Helps maintain reliable data recovery over long twisted-pair connections.
- Energy-Detection Mode: Detects Ethernet activity and supports reduced-power operation when no link energy is present.
- Low Power Consumption: Typical operating power is below 270 mW.
- 3.3 V Operation: Uses low-power 3.3 V CMOS technology with a 3.3 V MAC interface.
- 25 MHz Clock Output: Provides a 25 MHz clock output for compatible system requirements.
- RMII Clock Support: RMII operation uses a 50 MHz reference clock.
- MDC/MDIO Management: Standard serial management interface provides register access and PHY configuration.
- IEEE 1149.1 JTAG: Integrated JTAG interface supports boundary-scan testing.
- 10/100 Mbps Packet BIST: Built-in self-test functionality supports Ethernet packet-path verification.
- Programmable LED Outputs: LEDs can indicate link, speed, activity, duplex, and collision status.
- Single-Register PHY Status: Provides convenient access to key PHY operating information.
- Enhanced ESD Protection: Rated to ±4 kV HBM and ±1 kV CDM.
- Industrial Temperature Range: DP83848I is rated from -40°C to +85°C.
- LQFP-48 Package: 7 x 7 mm package provides a standard surface-mount footprint.
- Tape-and-Reel Packaging: DP83848IVVX/NOPB is supplied in 1,000-piece reels.
Applications
- Industrial Ethernet systems
- Factory automation
- PLC communication
- Embedded Ethernet devices
- Industrial control systems
- Transportation electronics
- Remote monitoring equipment
- Ethernet-enabled microcontroller systems
- Network gateways
- Data-acquisition systems
- Building automation
- Communication equipment
- Wireless base-station infrastructure
- General embedded applications
- Robotics
- Human-machine interfaces
- Industrial IoT equipment