Technical Specifications

Brand:

DYS

KV Rating:

1750KV

Motor Type:

Brushless (outrunner)

Rotation Direction:

CW (clockwise)

Lipo Battery:

Support 4-6S

Shaft:

Motor Width:

27.7 mm

Motor Height:

32.7 mm

Weight:

31.2g

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

DYS WU 2206 1750KV CW Brushless Motor for RC FPV Racing Drone and Multirotor - 4-6S LiPo, Lightweight 2206 Stator for 5-Inch and 6-Inch High-Speed Racing and Freestyle Builds

The DYS WU 2206 1750KV is the lower-KV, higher-voltage variant in the DYS WU 2206 motor range, sharing the same 2206 stator platform and lightweight construction of the 2400KV variant while shifting the optimal operating voltage range upward from 3-4S to 4-6S LiPo. The 2206 stator designation indicates a 22mm stator diameter and 6mm stator height, a compact stator geometry that provides competitive power density and a lightweight motor body suited to 5-inch and 6-inch propeller FPV racing and freestyle quadrotor builds where the wider 4-6S voltage range of the 1750KV variant gives pilots and builders flexibility to choose between the higher current, lower resistance power delivery of 4S and the increased voltage headroom, reduced per-watt current draw, and improved efficiency of 5S and 6S LiPo systems on the same motor without requiring a motor swap when changing battery cell count. The 1750KV rating on a 2206 stator positions this motor directly in the performance band occupied by the DYS SUNFUN 2306 1750KV at the same KV, but the 2206 stator's 1mm shorter height and corresponding marginally lower torque ceiling make the WU 2206 1750KV the lighter and more compact option between the two for pilots who prioritise minimum motor weight over maximum low-end torque headroom.

The 4-6S voltage range of the WU 2206 1750KV makes it particularly well-suited to the growing adoption of 5S and 6S power systems in the 5-inch FPV racing and freestyle community, where the combination of reduced winding resistance losses, lower current draw per unit of thrust, and improved efficiency at cruise throttle settings provides measurable benefits in motor temperature, ESC thermal loading, and run-time on equivalent capacity batteries compared to 3S and 4S systems at the same power output. On 4S, the 1750KV delivers an RPM-to-voltage ratio suited to standard 5-inch propeller diameters and pitches in the 45 to 51 pitch-diameter range. On 5S and 6S, the 1750KV allows the use of lower-pitch propellers selected specifically for the higher input voltage, maintaining thrust output while reducing the current demanded from the battery and ESC at equivalent throttle positions. The clockwise shaft rotation direction makes the WU 2206 1750KV the correct motor for CW motor positions in standard X-frame quadcopter motor layout, and the DYS WU series construction quality sustains reliable performance across the sustained high-load, high-vibration operating conditions of competitive FPV racing and aggressive freestyle flight.

Key Features

2206 Stator Format: 22mm stator diameter and 6mm stator height for compact, lightweight 2206 motor dimensions with 4-6S voltage range performance in FPV racing and freestyle builds
1750KV Rating: Lower-KV 4-6S optimised specification for efficient thrust generation on 5-inch and 6-inch propellers across 4S, 5S, and 6S LiPo power system configurations
4-6S LiPo Compatible: Wide 4S to 6S voltage range for flexible power system selection, including the increasingly popular 5S and 6S FPV racing platform configurations
CW Rotation: Clockwise shaft rotation for correct front-right and rear-left motor position assignment in standard X-frame quadcopter layout without ESC phase reversal
Lightweight 2206 Construction: Compact motor body and 2206 stator height for lower individual motor weight versus 2207 and 2306 format alternatives at equivalent KV
5S and 6S Platform Suited: 1750KV KV characteristic optimised for the higher voltage, lower current, improved efficiency advantages of 5S and 6S LiPo racing power systems
5-Inch and 6-Inch Propeller Class: KV and stator torque output matched to 5-inch and 6-inch propeller diameter and pitch combinations on 4S through 6S voltage levels
DYS WU Series Quality: DYS WU motor series construction for reliable performance and durable motor body under sustained FPV racing and aggressive freestyle flight loads
Lower-KV Racing Characteristic: 1750KV lower-RPM-per-volt profile for improved mid-throttle efficiency and higher torque-per-ampere compared to the 2400KV variant on equivalent voltage
Versatile Voltage Range: 4-6S compatibility allows the same motor to be used across 4S, 5S, and 6S builds with propeller selection adjusted for each voltage level.

Applications

5-inch FPV racing drone builds requiring a 2206 1750KV CW motor on 4S LiPo for competitive thrust output with lightweight 2206 motor construction
5S and 6S LiPo FPV racing and freestyle builds requiring a 1750KV 2206 motor for improved efficiency, reduced per-watt current draw, and lower motor temperature versus 4S equivalents
6-inch propeller FPV and long-range multirotor builds requiring 1750KV 2206 motors for efficient thrust generation on larger diameter propellers at 4S and 5S voltage
Lightweight FPV racing quadrotor builds where 2206 motor weight advantage over 2306 alternatives at equivalent KV reduces 4-motor set weight without sacrificing 4-6S voltage range
Standard X-frame 5-inch FPV quadcopter builds requiring matched CW and CCW 2206 1750KV motor pairs for correct Betaflight motor direction mapping on 4S through 6S power
DYS WU motor ecosystem FPV builds requiring a matched 2206 stator 1750KV CW motor with 4-6S compatibility alongside other DYS WU series motor and ESC products.