Resources:
Datasheet
VL53L4CDV0DH/1 High-Accuracy Time-of-Flight Proximity Sensor with 1 mm–1200 mm Ranging, 100 Hz Operation and 55 uA ULP Mode
The STMicroelectronics VL53L4CDV0DH/1 is a high-accuracy, low-power Time-of-Flight proximity sensor designed for short-range distance measurement, presence detection, robotics, touchless interfaces, and battery-powered sensing applications. Based on ST's FlightSense technology, the sensor measures distances from as close as 1 mm and supports ranging up to 1200 mm with a full field of view under specified conditions. Its 18° diagonal field of view and up to 100 Hz ranging frequency enable fast, precise target detection even when object colour and reflectance vary.
The VL53L4CD integrates a SPAD receiver array, 940 nm VCSEL infrared emitter, analogue driver, microcontroller, and advanced ranging engine in a compact 4.4 x 2.4 x 1 mm Optical LGA-12 package. An ultralow-power detection mode can reduce current consumption to 55 uA at 1 Hz and 2.8 V while performing continuous field-of-view monitoring and waking the host through a programmable interrupt when a target is detected. On-chip processing, a fast I²C interface, Class 1 eye-safe laser operation, and support for non-contact liquid-level sensing make the sensor suitable for compact and power-conscious embedded designs.
Key Features
- High-Accuracy ToF Ranging: Uses ST FlightSense Time-of-Flight technology for absolute distance measurements independent of target colour and reflectance.
- 1 mm Short-Range Linearity: Provides linear distance measurement down to 1 mm for close-proximity sensing.
- Up to 1200 mm Ranging: Supports high-performance proximity measurements up to 1.2 m with full field of view under specified conditions.
- Up to 1300 mm Typical Detection: Can detect a white target indoors up to approximately 1300 mm at a 50% minimum detection rate under specified test conditions.
- 18° Field of View: Narrow diagonal FoV helps improve target discrimination and proximity measurement.
- Up to 100 Hz Ranging: Fast measurement frequency supports responsive proximity, robotics, and user-interface applications.
- 55 uA Ultralow-Power Mode: ULP detection can reduce current consumption to 55 uA at 1 Hz with a 2.8 V supply.
- 22 mA Typical Active Current: Normal active ranging consumes approximately 22 mA with default driver settings.
- Embedded On-Chip Processing: Processes ranging information internally instead of transmitting raw sensor data to the host.
- Programmable Interrupt Threshold: GPIO1 can wake the host controller when a target crosses a programmed distance threshold.
- 940 nm VCSEL: Integrated invisible infrared laser emitter provides reliable Time-of-Flight illumination.
- Class 1 Eye Safety: Integrated VCSEL is classified as a Class 1 laser product under specified operating conditions.
- Integrated SPAD Array: Single-photon avalanche diode receiver supports accurate detection of returning infrared light.
- Up to 1 MHz I²C: Fast-mode Plus I²C interface supports efficient communication with microcontrollers and processors.
- 2.6–3.5 V Supply: Supports common low-voltage embedded power systems with 2.8 V nominal operation.
- 1.6–3.5 V I/O Supply: Digital interface voltage range supports integration with a variety of host processors.
- Hardware Shutdown: XSHUT input supports hardware standby and sensor control.
- Low Standby Consumption: Hardware standby current is approximately 5 uA typical.
- Cover-Window Support: Designed to operate behind suitable cover-glass materials for enclosed product designs.
- Liquid-Level Measurement: Supports non-contact liquid-level applications using ST reference software and application examples.
- Pin-Compatible Family: Pin-to-pin compatible with several ST ToF devices including VL53L0X, VL53L1X, VL53L1CB, VL53L3CX, VL53L4CX, and VL53L4ED.
- Compact Optical LGA-12: 4.4 x 2.4 x 1 mm reflowable package supports compact embedded products.
- Industrial Temperature Range: Rated for operation from -30°C to +85°C.
- Tape-and-Reel Packaging: VL53L4CDV0DH/1 is supplied as an Optical LGA-12 with liner in tape-and-reel packaging.
Applications
- Proximity sensing
- Presence detection
- Touchless switches
- Robotics wall tracking
- Robot cliff detection
- Access-control systems
- Automatic faucets
- Soap and sanitary dispensers
- Smart lighting
- Thermostats
- Home appliances
- Barcode readers
- Biometric distance sensing
- Virtual fences
- Battery-powered devices
- Non-contact liquid-level sensing
- Water-level monitoring
- Fuel-level monitoring
- Smart farming systems
- Embedded distance measurement