Description
The SPX-18991 NFC/RFID Tag is a Dynamic NFC/RFID Tag for smôl boards. The STMicroelectronics ST25FV64KC is a dynamic Near Frequency Communication / Radio Frequency Identification tag IC with 64Kbit (8KByte) of on-board EEPROM memory. It has an I2C interface which the smôl processor board can use to read and write to the EEPROM memory. The NFC/RFID tag peripheral board would also let you configure your smôl logging system.
-
Contactless interface
- Based on ISO/IEC 15693
- NFC Forum Type 5 tag certified by the NFC Forum
- Supports all ISO/IEC 15693 modulations, coding, sub-carrier modes and data rates
- Custom fast read access up to 53 kbit/s
- Single and multiple blocks read (same for Extended commands)
- Single and multiple blocks write (up to four) (same for Extended commands)
-
Memory
- 64-Kbit of EEPROM
- I2C interface accesses bytes
- RF interface accesses blocks of 4 bytes
- Write time:
- From I2C: typical 5 ms for 1 up to 16 bytes
- From RF: typical 5 ms for 1 block
- Data retention: 40 years
-
Data protection
-
User memory: one to four configurable areas, protectable in read and/or write by three 64-bit passwords in RF and one 64‑bit password in I2C
-
System configuration: protected in write by a 64-bit password in RF and a 64-bit password in I2C
-
-
Interface: I2C
-
I2C Addresses:
-
User Memory: 0x53
-
System Memory: 0x57
-
RF Switch Off: 0x51
-
RF Switch On: 0x55
-
-
Length: 1.60" (40.6mm)
-
Width: 0.42" (10.7mm)
-
Height: 0.27" (6.8mm) max.
-
Weight: 1.9g (0.07oz)
-
PCB thickness: 0.8mm
-
Datasheet (ST25FV64KC)
-
Application Note (ST25FV64KC)
-
Antenna Datasheet (W3102)