Resources
Flexible Polyurethane PU Tube For Micro Pump Systems With 95 A Hardness And 0-10 kgf/cm2 Working Pressure
This flexible polyurethane PU tube is designed for pneumatic connections in micro pump systems. It is part of the BD Micro Pump Accessories Series and is supplied in a 1 m length. The tube carries compressed air within the specified pressure and temperature limits, which makes it a practical choice for air pumps, vacuum lines and small pneumatic circuits.
The tube is made of polyurethane with a hardness of 95 A. It offers good abrasion resistance and is easy to route inside compact equipment. It is available in 4 models, from 2.5 mm x 4.0 mm to 8.0 mm x 12.0 mm (inner diameter x outer diameter), so you can match the tube to your pump port and fitting size. The transparent body also lets you check the line visually during assembly and maintenance.
Key Features
- Four Size Options: Models BD-PUT01, BD-PUT02, BD-PUT03 and BD-PUT04 cover outer diameters of 4.0 mm, 6.0 mm, 10.0 mm and 12.0 mm.
- Polyurethane Construction: Made of PU material with 95 A hardness for a balance of flexibility and firmness.
- Good Abrasion Resistance: Suited to routing where the tube may rub against other parts.
- Easy Installation: Flexible and lightweight, so it fits easily in compact equipment.
- Wide Pressure Range: Working pressure of 0-10 kgf/cm2 (0-0.98 MPa / 0-9.8 bar) at 20 degrees C.
- Wide Temperature Range: Operates from -20 degrees C to 70 degrees C.
- Transparent Body: Allows easy visual inspection of the air line.
- Standard 1 m Length: Can be cut to the required size for each connection.
Applications
- Micro air pumps and micro vacuum pump systems
- Pneumatic connections in compact equipment
- Compressed air lines in laboratory setups
- Prototyping and DIY pneumatic projects
- Pneumatic actuators, valves and small cylinders
- Replacement tubing for pump accessories
