Description
The Environment Sensor HAT is an accessory designed to enhance the capabilities of Raspberry Pi. With a variety of onboard sensors, including an ambient light sensor, VOC sensor, IR/UV sensor, gyroscope, accelerometer, magnetometer, barometer, temperature & humidity sensor, and more, it allows the Raspberry Pi to collect environment data such as temperature, humidity, air pressure, ambient light intensity, VOC levels, IR rays, UV rays, and more.
In addition to environmental data collection, the Environment Sensor HAT can also be utilized in robotics projects to detect motion and orientation. The HAT is equipped with a simple I2C bus, which enables seamless communication with the Raspberry Pi.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
- I2C bus, allows retrieving data by just using two wires
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
-
Environment Sensor HAT x1
-
2x20PIN female header x1
-
4PIN header x1
-
RPi screws pack (2pcs) x1
Specifications
TSL25911FN DIGITAL AMBIENT LIGHT SENSOR | |
---|---|
I2C address | 0x29 |
Effective range | 0~88000Lux |
BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR | |
I2C address | 0x76 |
Temperature detection | -40 ~ 85C (0.01C resolution, +-1C accuracy) |
Humidity detection | 0~100 Percent RH (0.008 Percent RH resolution, +-3 Percent RH accuracy, 1s response time, <=2 Percent RH delay) |
Air pressure detection | 300~1100hPa (0.18Pa resolution, +-1hPa accuracy) |
ICM20948 MOTION SENSOR (9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCROPE, 3-AXIS MAGNETOMETER) |
|
I2C address | 0x68 |
Accelerometer resolution | 16-bit |
Accelerometer range (configurable) | +-2, +-4, +-8, +-16g |
Gyroscope resolution | 16-bit |
Gyroscope range (configurable) | +-250, +-500, +-1000, +-2000 Degree/sec |
Magnetometer resolution | 16-bit |
Magnetometer range | +-4900µT |
LTR390-UV-1 UV SENSOR | |
I2C address | 0x53 |
Response wavelength | 280nm - 430nm |
SGP40 VOC SENSOR | |
I2C address | 0x59 |
Measuring range | 0 ~ 1,000 ppm ethanol equivalent |
Limit condition | < 0.05 ppm ethanol equivalent OR < 10 Percent preset concentration point (the larger one should prevail) |
Response time | < 10 s (tau 63 Percent) |
Start time | < 60 s |
On-chip humidity compensation support |
Environment Sensor HAT For Raspberry Pi
Designed For Raspberry Pi Series
Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards
for reference ONLY, the Raspberry Pi Zero WH is NOT included.
What's On Board
Pinout Definition
Outline Dimensions