Description
The BOOSTXL-DRV8301 is 10A, 3-phase brushless DC drive stage based on the DRV8301 pre-driver and CSD18533Q5A NexFET power MOSFET. The module has 3x low side current sense amps (2 internal to DRV8301, 1 external). The module also has a 1.5A step down buck converter, is fully protected with short circuit, thermal, and shoot-through protection, and is easily configured via a SPI interface. This boosterpack is ideal for those wishing to learn about sensorless brushless control techniques and drive stage design. This kit was designed to work with any LaunchPad XL, with primary software support through the http://www.ti.com/tool/LAUNCHXL-F28027F using MotorWare to support the InstaSPIN-FOC sensorless control solution.
-
6 to 24V supply input
-
Supports up to 14A peak, 10A continuous current output
-
Supports voltage and current feedback for InstaSPIN-FOC sensorless control solution
-
Complete brushless DC drive stage in ultra small form factor (2.2” x 2.3”)
-
3x low side current sense amps, 6x Power FETs (< 6.5mOhm) & 1.5A step down buck converter
-
Drive stage is fully protected including short circuit, thermal, shoot-through, and under voltage protection.
- BOOSTXL-DRV8301 Quick Start Guide
- BOOSTXL-DRV8301 Hardware User's Guide
- InstaSPIN-FOC and InstaSPIN-MOTION User's Guide (Rev. H)
- LAUNCHXL-F28069M overview (Rev. B)
- LAUNCHXL-F28027 C2000 Piccolo LaunchPad experimenter kit (Rev. C)
- TMS320F2802xF InstaSPIN-FOC Software Technical Reference Manual
FAQs:
Q: What is the maximum current output of the BOOSTXL-DRV8301 BoosterPack?
A: The BOOSTXL-DRV8301 supports up to 14A peak current and 10A continuous current output.
Q: What voltage range does the BOOSTXL-DRV8301 accept?
A: The module accepts a supply input voltage ranging from 6V to 24V.
Q: What protection features does the BOOSTXL-DRV8301 have?
A: The BOOSTXL-DRV8301 is fully protected with short circuit, thermal, shoot-through, and under-voltage protection.
Q: Is the BOOSTXL-DRV8301 a standalone board?
A: No, the BOOSTXL-DRV8301 is not a standalone evaluation kit. It requires a compatible LaunchPad XL to provide the necessary control signals.
Q: What applications is the BOOSTXL-DRV8301 suitable for?
A: The BOOSTXL-DRV8301 is ideal for those learning about sensorless brushless control techniques and drive stage design. It is also suitable for evaluating TI's InstaSPIN-FOC sensorless control solution when combined with a compatible LaunchPad XL.
