Wio Tracker L1 Pro with OLED Display, LoRa 862-930 MHz, nRF52840, L76K GPS - Seeed Studio

Seeed Studio

No reviews yet Write a Review
SKU:
078-114993649
MPN:
114993649
Wio Tracker L1 Pro is a pre-flashed Meshtastic node with a 1.3-inch OLED, LoRa 862-930 MHz, nRF52840, L76K GPS and a 2000 mAh battery. It suits off-grid mesh messaging, tracking and outdoor use. View full description
  • 100% Original Products
  • GST Invoice
  • Earn 3% Cashback
₹6,218.60 inc. GST
₹5,270.00 ex. GST
21 people looking at this.

Technical Specifications

Brand:
Seeed Studio
Processor:
Nordic nRF52840 ARM Cortex-M4 with FPU runs up to 64 MHz
On-Chip Memory:
1 MB flash and 256 kB RAM
Wireless:
LoRa: Based on Wio-SX1262, supports 862-930MHz, Bluetooth 5.0,
GPS:
L76K(GPS,BeiDou,GLONASS,QZSS)
Display Size:
1.3 inch
Resolution:
128x64 Pixels
Active Area(mm):
L34.5xW23.0xH1.47
Power:
Type-C: 5v---1A
Battery Capacity:
2000 mAh
Charging Port:
Type-C
Solar Input:
Supported
Enclosure Material:
PC+ABS (injection-molded)
Firmware:
Meshtastic (pre-flashed)
Expansion:
Grove ecosystem, PTH headers
Debug Interface:
SWD

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

Resources:

 

Wio Tracker L1 Pro Meshtastic Node with 1.3-Inch OLED Display, LoRa 862-930 MHz, nRF52840 and L76K GPS for Off-Grid Mesh Communication

The Wio Tracker L1 Pro from Seeed Studio is a low-power Meshtastic node built for reliable LoRa mesh communication. It combines a long-range LoRa radio (862-930 MHz), a Nordic nRF52840 processor and an L76K GPS module, so you can send messages and share accurate location data across a Meshtastic network. The L1 Pro is a fully integrated version with an OLED display, a rechargeable battery and a durable enclosure, so a working node is ready within minutes of unboxing.

The device ships pre-flashed with Meshtastic firmware and needs no extra assembly. The PC+ABS injection-molded enclosure is more durable and consistent than the 3D-printed nylon housings commonly used for DIY nodes. With a built-in 2000 mAh battery, Type-C charging and solar input support, it is well-suited to hiking, field surveys, outdoor events and remote-area networking where mobile coverage is weak or unavailable.

Key Features

  • Pre-Flashed Firmware: Ships with Meshtastic firmware pre-installed, so setup is quick and straightforward.
  • LoRa Radio: Operates in the 862-930 MHz band for long-range, low-power mesh messaging.
  • nRF52840 Processor: Nordic low-power SoC suited to battery-powered, always-on nodes.
  • L76K GPS Module: Provides accurate positioning for location sharing and tracking within the mesh.
  • OLED Display: 1.3-inch, 128x64 screen for checking messages, node status and position at a glance.
  • Triple Power Supply Options: Built-in 2000 mAh battery, Type-C fast charging and solar input support for flexible outdoor deployment.
  • PC+ABS Enclosure: Injection-molded housing offering better durability and consistency than 3D-printed nylon.
  • High Expandability: Compatible with the Grove ecosystem, with PTH headers and an SWD debugging interface for custom hardware and development work.

Applications

  • Off-grid and emergency communication
  • Hiking, trekking and camping group messaging
  • Outdoor networking and field surveys
  • Asset and vehicle location tracking
  • Remote-area community mesh networks
  • Prototyping and learning with Meshtastic and Grove sensors

Hardware Overview

Package Content:

  • Wio Tracker L1 Board with 1.3 inch OLED Display, 3D-Printed Enclosure and batteryx1
  • LoRa Antennax1