TPS2116DRLR - Power Switch N-Channel 1.6-5.5V IC SOT-583-8

Texas Instruments

No reviews yet Write a Review
SKU:
035-TPS2116DRLR
MPN:
TPS2116DRLR
Quantity
Unit Price (ex. GST)
Buy 1 - 9
₹ 32.90
Buy 10 - 99
₹ 31.25
Buy 100 - 999
₹ 29.61
Buy 1000 or above
₹ 26.32
TPS2116DRLR is a 2.5 A low-IQ power mux with 1.6 V to 5.5 V input, 40 mOhm typical on-resistance, automatic priority and manual switching, reverse-current blocking, and SOT-583-8 package. View full description
  • 100% Original Products
  • GST Invoice
  • Earn 3% Cashback
₹38.82 inc. GST
₹32.90 ex. GST

Technical Specifications

Brand:
Texas Instruments
Package / Case:
SOT-583
Number of Pins:
8
Number of Channels:
2
Resistance:
40 milliohm
Output Type:
N-Channel
Interface:
Logic
Voltage - Load:
1.6V ~ 5.5V
Input Type:
Non-Inverting
Operating Temperature:
-40 C ~ 125 C
Mounting Type:
Surface Mount

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

Resources:
Datasheet

Low-IQ 2.5 A Power Multiplexer With 1.6 V To 5.5 V Input Range And Automatic Priority Switching

The TPS2116DRLR from Texas Instruments is a low-power, dual-input power multiplexer designed to switch between 2 power sources while maintaining a controlled output supply. It operates from 1.6 V to 5.5 V and supports up to 2.5 A continuous current. Integrated N-channel MOSFETs provide a typical on-resistance of 40 mOhm, helping reduce conduction losses in battery-powered, portable, and low-voltage electronic systems.

The TPS2116DRLR supports both automatic priority and manual switchover modes. In automatic priority mode, VIN1 is selected as the preferred source, and the device switches to VIN2 when the primary supply drops below the required condition. Manual mode allows a GPIO or control signal to select the active input. With only 1.32 uA typical quiescent current and 50 nA typical VIN2 standby current, the device is well-suited for applications where one source is a battery. Controlled output slew rate, reverse-current blocking, and thermal shutdown further support reliable power-source management.

Key Features

  • Wide Input Range: Supports 1.6 V to 5.5 V power sources
  • 2.5 A Current Capability: Handles up to 2.5 A continuous output current
  • Low On-Resistance: Integrated N-channel MOSFETs provide 40 mOhm typical on-resistance
  • Low Quiescent Current: Draws only 1.32 uA typical during operation
  • Low Standby Current: VIN2 standby current is only 50 nA typical
  • Automatic Priority Mode: Prioritises VIN1 and automatically switches to VIN2 when required
  • Manual Selection Mode: Allows input-source selection through an external GPIO or control signal
  • Controlled Slew Rate: Typical output rise time of 1.3 ms at 3.3 V helps limit inrush current during start-up
  • Reverse-Current Blocking: Prevents reverse current when VOUT is greater than the selected VIN input
  • Thermal Shutdown: Integrated protection disables the device during excessive temperature conditions
  • Compact Package: 8-pin SOT-583 package supports space-constrained PCB designs
  • Battery-Friendly Operation: Low operating and standby currents help extend battery-powered system runtime

Applications

  • Battery-powered systems
  • Dual-power-source designs
  • Backup battery switching
  • Portable electronics
  • IoT devices
  • Wearable electronics
  • Smart meters
  • Wireless sensor nodes
  • Embedded controllers
  • Power-source selection circuits
  • USB and battery power selection
  • Low-power industrial electronics
  • System power-path management