Radiolink M10N GPS SE100 Module For GLONASS/BeiDou APM PX4 Pixhawk 2.4.8 Flight Controller

The Radiolink M10N SE100 is a high-specification compact GPS and compass module built around the u-blox UBX-M10050 (M10) 72-channel GNSS decoder chip, Honeywell HMC5983 magnetometer, Infineon MMIC BGA715L7 power amplifier IC, and Murata Surface Acoustic Wave dual filter, combining premium component selection across every stage of the signal chain to deliver 50cm concurrent GNSS positioning accuracy and 6-second 20-satellite acquisition in open-ground conditions. The UBX-M10050 72-channel chipset is a significant step above the single GNSS 7N receivers commonly found in entry-level Pixhawk-compatible GPS modules, providing the channel count and multi-constellation processing architecture required for concurrent reception of GPS, QZSS L1 C/A, GLONASS L1OF, BeiDou B1, and SBAS L1 C/A systems, including WAAS, EGNOS, and MSAS augmentation services. The Infineon MMIC BGA715L7 low-noise power amplifier IC in the RF front-end boosts incoming satellite signal strength before the decoder stage, directly contributing to the module's ability to acquire and track weak satellite signals in challenging reception environments, including valley floors, urban canyons, and partially obstructed sky conditions.

The Murata SAWF dual independent filtering technology applies Surface Acoustic Wave filtering at 2 independent stages in the signal path, providing substantially stronger adjacent-channel interference rejection than single-filter designs common in lower-specification GPS modules. This dual-filter architecture is particularly relevant in FPV and racing drone applications, where the 2.4GHz RC link, 5.8GHz video transmitter, and high-frequency PWM switching noise from ESCs create a dense interference environment that degrades positioning performance on less well-filtered GNSS receivers. The Honeywell HMC5983 magnetometer delivers heading reference data to the flight controller alongside GNSS position and velocity output, and the 2.5 dBi high-gain selective ceramic antenna improves signal reception compared to standard patch antennas of equivalent physical size. An onboard GPS signal search satellite indicator function with an exclusive Radiolink patent adds visual satellite acquisition status feedback without requiring GCS software connection. The 6P MX interface connector is pin-compatible with the Pixhawk 2.4.8 external GPS socket for direct out-of-the-box connection, and the 47.98 x 40.64 x 14.99mm form factor keeps the module compact for racing drone and quadcopter installation.

• GNSS Decoder Chip: u-blox UBX-M10050 (M10) 72-channel decoder for multi-constellation concurrent GNSS reception, substantially above single GNSS 7N chipset performance
• Positioning Accuracy: 50cm accuracy with concurrent GNSS reception in open-field and valley station-keeping conditions
• Satellite Acquisition: 20 satellites acquired in 6 seconds in open-ground conditions for rapid pre-flight GPS readiness
• Multi-Constellation Support: Concurrent reception of GPS, QZSS L1 C/A, GLONASS L1OF, BeiDou B1, and SBAS L1 C/A including WAAS, EGNOS, and MSAS augmentation
• Honeywell HMC5983 Compass: Honeywell HMC5983 magnetometer for accurate heading reference alongside GNSS position and velocity data output
• Infineon MMIC BGA715L7: RF front-end low-noise power amplifier IC from Infineon for improved weak-signal satellite acquisition and tracking performance
• Murata SAWF Dual Filter: Independent dual Surface Acoustic Wave filtering from Murata for stronger adjacent-channel interference rejection versus single-filter GPS modules
• 2.5dBi Ceramic Antenna: High-gain selective ceramic patch antenna for improved satellite signal reception versus standard equivalent-size patch antennas
• GPS Signal Search Indicator: Onboard satellite acquisition status indicator function with exclusive Radiolink patent for visual fix status confirmation without GCS software
• 6P MX Interface: 6-pin MX connector, pin-compatible with Pixhawk 2.4.8 external GPS socket for direct out-of-box connection
• APM, PX4, and Pixhawk Compatible: Direct compatibility with APM, PX4, and Pixhawk 2.4.8 flight controllers via 6P MX interface
• Compact Form Factor: 47.98 x 40.64 x 14.99mm (1.89 x 1.60 x 0.59 inches) for racing drone, quadcopter, and compact UAV installation
• Triple-Mode Operation: Simultaneous triple-constellation operation across GPS, GLONASS, and BeiDou for enhanced satellite pool and positioning reliability

• Pixhawk 2.4.8, APM, and PX4 flight controller builds requiring a high-specification 72-channel u-blox M10 GPS and HMC5983 compass module with 6P MX direct connector compatibility
• RC racing drones and quadcopters requiring 50cm concurrent GNSS positioning accuracy with Murata dual SAWF interference rejection in dense RF environments
• FPV and autonomous UAV builds requiring concurrent GPS, GLONASS, BeiDou, QZSS, and SBAS augmentation reception from a compact high-gain ceramic antenna module
• Valley, urban canyon, and partially obstructed sky UAV operations requiring Infineon MMIC power amplifier-assisted weak-signal satellite acquisition and tracking
• APM Mission Planner and PX4-based waypoint navigation, position hold, and return-to-home builds requiring 50cm GNSS accuracy and 6-second cold acquisition
• Radiolink Pixhawk-compatible builds requiring a direct-fit 6P MX GPS and compass module with onboard satellite acquisition status indicator.

• 1 x M10N SE100 GPS
• 1 x Metal rod bracket
• 1 x Connecting cable
• 2 x Metal fixing gasket
• 1 x Foam fixed sticker