Resources:
Datasheet
PCM5102APWR 32-Bit 384 kHz Stereo Audio DAC with 2.1 VRMS DirectPath Output and Integrated PLL
The Texas Instruments PCM5102APWR is a high-performance stereo digital-to-analog converter designed for digital audio equipment, embedded audio systems, media players, amplifiers, and other applications requiring high-quality line-level analogue output. It accepts 16-, 24-, and 32-bit PCM audio data with sampling rates from 8 kHz to 384 kHz and supports I2S and left-justified digital audio formats. TI's advanced segment-DAC architecture provides a typical 112 dB signal-to-noise ratio and -93 dB THD+N for clean stereo audio reproduction.
The PCM5102A integrates a high-performance PLL referenced from the bit clock, eliminating the requirement for a separate master clock in many designs and allowing a simple 3-wire I2S interface. DirectPath charge-pump technology generates ground-centred 2.1 VRMS line outputs without external DC-blocking capacitors, while the integrated line driver supports loads down to 1 kOhm per output. Intelligent soft-mute, automatic power-save operation, hardware-pin configuration, and low out-of-band noise simplify audio-system design while reducing external circuitry.
Key Features
- 32-Bit Stereo DAC: Accepts 16-, 24-, and 32-bit PCM audio data for high-resolution digital audio applications.
- Up to 384 kHz Sampling: Supports sample rates from 8 kHz to 384 kHz.
- 112 dB SNR: Provides high dynamic performance for low-noise stereo audio playback.
- -93 dB THD+N: Delivers low distortion and noise for clean analogue output.
- 2.1 VRMS Line Output: Provides ground-centred line-level output suitable for downstream amplifiers and audio stages.
- DirectPath Technology: Integrated charge-pump architecture eliminates the need for output DC-blocking capacitors.
- 1 kOhm Minimum Load: Integrated line driver supports loads down to 1 kOhm per output pin.
- Integrated Audio PLL: Generates the required internal system clock from BCK, reducing the need for a separate MCLK signal.
- 3-Wire I2S Operation: Can operate using BCK, LRCK, and DIN without an external master clock.
- I2S and Left-Justified Formats: Supports commonly used PCM digital-audio interface formats.
- Ultra-Low Out-of-Band Noise: Reduces unwanted high-frequency noise that can contribute to EMI and downstream aliasing.
- Intelligent Muting: Soft up/down ramp and analogue mute provide pop-free transitions and up to 120 dB mute SNR.
- Automatic Power-Save Mode: Enters low-power operation when LRCK and BCK are inactive.
- Hardware Configuration: Device operation is configured through dedicated hardware pins without a serial control interface.
- Flexible Digital Logic: Supports 1.8 V or 3.3 V failsafe LVCMOS digital inputs.
- 3.3 V Analogue Supply: Designed for single-supply analogue operation with separate compatible digital logic supply.
- Clock Error Protection: Intelligent clock monitoring helps prevent audible artefacts during clock loss or abnormal conditions.
- PowerSense Protection: Undervoltage monitoring supports controlled mute behaviour during supply disturbances.
- Compact TSSOP-20 Package: Suitable for space-constrained embedded and consumer audio PCB layouts.
- Tape-and-Reel Packaging: PCM5102APWR is supplied in 2,000-piece production reels for automated assembly.
Applications
- Digital audio players
- Network audio systems
- Streaming audio devices
- Digital amplifiers
- Active speakers
- Audio receivers
- Embedded audio systems
- Single-board computer audio interfaces
- Digital media equipment
- Home audio equipment
- Instrumentation
- Professional audio interfaces
- Multimedia systems
- Automotive-development prototypes
- DSP audio systems
- FPGA-based audio designs