AMASS XT90 Large-Current High-Load Power On-Off Toggle Switch for RC Aircraft, Car, ESC, and Drone Battery - 15A 250VAC Rated with 12mm Panel-Mount Screw Hole
The AMASS XT90 Large-Current High-Load Power On-Off Toggle Switch is a dedicated battery isolation and power management switch designed for RC aircraft, cars, boats, drones, and ESC-driven motor systems where a reliable, high-current-rated mechanical switch is required to safely connect and disconnect the main battery from the power distribution system without pulling or disturbing the battery connector itself. Built around the industry-standard AMASS XT90 connector format on both the battery and load sides, this toggle switch integrates directly into existing XT90-terminated power harnesses without requiring connector replacement or adapter leads, making it a straightforward add-on for RC builders looking to improve battery management safety and convenience on platforms already using XT90 connectors throughout the power system. The switch is rated at 15A at 250VAC, providing a robust current-handling specification for the high-load motor and ESC circuits typical of RC drone, car, boat, and aircraft power systems, where inrush and sustained operating currents regularly stress lower-rated switch alternatives.
The 12mm panel-mount screw hole diameter allows the toggle switch body to be mounted cleanly through a standard 12mm chassis or fuselage panel cutout, presenting the toggle actuator externally for convenient one-handed operation while keeping the XT90 connector terminations and cable runs on the interior side of the enclosure or frame. The total cable length of approximately 35cm across both sides of the switch provides sufficient routing flexibility for installation in most RC aircraft fuselages, car chassis, and drone frames where the battery compartment and ESC or power distribution board are separated by a meaningful distance within the airframe or chassis structure. At 29 x 17 x 50mm the switch body is compact relative to its current rating, and the screw-mount format ensures a secure, vibration-resistant panel installation in demanding RC operating environments.
Key Features
- Connector Type: AMASS XT90 on both battery and load sides for direct integration into existing XT90-terminated RC power harnesses without adapter leads
- Current Rating: 15A at 250VAC for reliable high-load motor and ESC circuit switching across RC drone, car, boat, and aircraft power systems
- Panel-Mount Design: 12mm screw hole diameter for clean through-panel installation in RC aircraft fuselages, car chassis, and drone frames
- Toggle Switch Operation: Mechanical on-off toggle for positive, tactile battery isolation and power connection without transmitter or electronic intervention
- Total Cable Length: Approximately 35cm across both sides for flexible routing between battery compartment and ESC or power distribution board
- High-Load Rated: Designed for RC motor and ESC high-inrush and sustained operating current demands in drone, car, boat, and aircraft power circuits
- AMASS XT90 Format: Industry-standard AMASS XT90 connector for broad compatibility across RC platforms using XT90 power connectors throughout the power system
- Vibration-Resistant Mounting: Screw-mount panel installation resists vibration-induced loosening in demanding RC flight and drive operating environments
- Compact Switch Body: 29 x 17 x 50mm switch body compact relative to current rating for installation in space-constrained RC chassis and fuselage panels
- Multi-Platform Compatible: Suitable for RC drones, cars, boats, aircraft, and any ESC-driven motor system using XT90 battery connectors
Applications
- RC drone and multirotor battery isolation and power management requiring a panel-mount XT90 on-off toggle switch for pre-flight battery connection safety
- RC car and ground vehicle ESC power circuit switching requires a high-current XT90 toggle switch for convenient battery isolation without connector removal
- RC aircraft and fixed-wing fuselage panel-mount battery power switch installation with 12mm standard panel cutout compatibility
- RC boat and watercraft battery circuit power management requiring a robust, high-load-rated mechanical on-off switch in the XT90 power harness
- ESC and motor power distribution systems require a dedicated mechanical isolation switch between the main LiPo battery and the ESC power input
- LiPo battery safety and storage management builds requiring a convenient battery isolation switch to prevent parasitic drain and unintended motor activation.
Package Includes:
