Description
This is a qwiic compatible 1.0 mm pitch 4-pin right-angle male pin JST connector. This connector is used on all Qwiic-based and STEMMA QT based boards and can be used to create your own I2C-based device compatible with the Qwiic system. This is a wire-to-board connector. It is a crimp-style connector, a disconnectable type. It has a good locking mechanism and requires force to remove the female connector from the male connector on board.
When used with Qwiic the pins are:
Ground - Black wire on cables
3.3VDC Power - Red wire on cables
I2C SDA Data - Blue wire on cables
I2C SCL Clock - Yellow wire on cables
STEMMA QT / Qwiic JST 4-Pin 1mm Pitch White Female Connector Cable 150mm Long - Both Side can be purchased seperately.
