The RS232/485 TO ETH Industrial Converter is designed specifically for industrial applications. It serves as a reliable solution for converting RS232/RS485 signals to Ethernet, facilitating bi-directional transparent data transmission. This converter allows seamless communication between devices connected through RS232/RS485 interfaces and those connected via RJ45 port Ethernet. The converter can handle data transmission in both directions simultaneously.
One of the key features of this converter is its ease of configuration. The converter can be conveniently configured through a user-friendly webpage interface, eliminating the need for complex manual settings. This makes it a user-friendly solution for integrating RS232/RS485 devices into Ethernet networks.
Features
-
M4 series 32-bit ARM processor with up to 120MHz frequency, fast speed, stable and reliable
-
10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable
-
Both RS232 and RS485 interface, allows to work independently at the same time, without interfering each other
-
Configurable baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space
-
Multi indicators, for monitoring communicating and working status
-
Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)
-
Supports Modbus, suit for industrial application
-
Supports Websocket, allows bi-directional transparent data transmission with RS232/RS485 port via webpage directly
-
Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software
-
Supports customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data
-
Supports customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished
-
Supports customized webpage, allows user to customize the module configuration page
-
Supports RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change
-
KeepAlive mechanism, detects broken connection, auto re-connecting
-
Supports time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time
-
Supports DNS domain name resolution, configurable DNS server
-
Supports DHCP, auto-obtained IP or static IP
-
Firmware is upgradable via the network
-
Restore to factory settings via software and/or hardware
-
Comes with default MAC address, which is customizable
-
Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software
-
Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.
Specifications
-
Ethernet:
- Connector: 4-pin RJ45
- Communication rate: 10/100Mbps
- Interface protection: 2KV electromagnetic isolation
- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client, Websocket
- TX cache: 16Kbyte
- RX cache: 16Kbyte
-
RS485/RS232:
- Connector:
- RS485: screw terminal (A+, B-, GND)
- RS232: DB9 male
- Data bit: 5bit, 6bit, 7bit, 8bit
- Stop bit: 1, 2
- Parity bit: None, Odd, Even, Mark, Space
- Baudrate: 600bps~230.4Kbps
- TX cache: 2Kbyte
- RX cache: 2Kbyte
- Hardware flow control: RTS/CTS
- Interface protection:
- RS485: 2KV ESD protection, lightningproof, anti-surge, over-current protection
- RS485 pull up/down registers: 2.2Kohm
-
Power:
- Power supply: 5.0~36.0V (5V recommended)
- Operating current: 86.5mA (@5V)
- Power consumption: <1W
- Interface protection: reverse-proof, ESD protection, anti-surge
-
Environment:
Package Content
-
RS232/485 TO ETH x1
-
5V power adapter (EU plug) x1
-
Ethernet cable x1
-
Male-to-Female serial cable x1
-
Female-to-Female serial cable x1
Resources
Dimensions
-
FAQs:
Q: What is the maximum baud rate supported by this converter?
A: The converter supports a maximum baud rate of 230.4Kbps for both RS232 and RS485 interfaces.
Q: Can the RS232 and RS485 interfaces work independently at the same time?
A: Yes, the RS232 and RS485 interfaces can operate simultaneously without any interference.
Q: What are the different working modes supported by this converter?
A: The converter supports TCP Server, TCP Client, UDP Server, UDP Client, and HTTPD Client modes, providing flexibility for various applications.
Q: Is the converter easy to configure?
A: Yes, the converter can be easily configured through a web interface, making it user-friendly.
Q: What is the power supply range for this converter?
A: The converter accepts a wide input voltage range of 5.0V to 36.0V, with a recommended voltage of 5V.
