B14 Pro 1200TVL FPV Camera with 1.8mm and 2.1mm Switchable Lens - PAL and NTSC OSD Adjustable, D-WDR, 3DNR, 0.001 Lux Minimum Illumination for RC FPV Racing Drone
The B14 Pro is a compact, high-specification 1200TVL analogue FPV camera available in 1.8mm and 2.1mm switchable lens configurations, designed for RC FPV racing drones and freestyle quadrotors where image quality, low-light performance, and on-screen display parameter adjustment capability are primary camera selection criteria. At 14 x 14mm and 2.5 grams in the lighter variant, the B14 Pro occupies the ultra-compact nano and micro camera class that has become the standard for sub-250g and weight-optimised FPV racing builds, providing full-featured FPV camera capability in a form factor that fits standard nano camera bays across the majority of current FPV racing and freestyle frames without adapter plates or modified mounts. The 1200TVL horizontal resolution delivers cleaner image detail and sharper obstacle definition than lower-TVL FPV cameras in equivalent lighting, directly relevant in racing applications where pilot reaction time to obstacles and gates is reduced by image clarity and edge sharpness in the video feed.
The OSD menu system, accessible and adjustable internally, provides comprehensive image parameter control across exposure brightness, exposure mode, gain, white balance, contrast, sharpness, saturation, digital noise reduction, video format switching between PAL and NTSC, and digital dynamic range settings, with OSD language support covering Chinese, English, German, Italian, and Russian for international FPV pilot accessibility. The 0.001 Lux minimum illumination rating at f1.2 places the B14 Pro among the highest-sensitivity FPV cameras in the analogue class, sustaining usable video output in near-darkness conditions well beyond the capability of standard FPV cameras rated at 0.01 Lux or higher. The D-WDR digital wide dynamic range processing addresses high-contrast outdoor scenes where simultaneous bright sky and shadowed obstacles in the same frame degrade image legibility, while 3DNR three-dimensional digital noise reduction reduces the video noise present in low-light and high-gain operation without the motion blur associated with 2DNR processing. PAL and NTSC format selection is switchable through the internal OSD without physical modification, and the 5-20V wide input voltage range accommodates direct connection to 1S through 4S LiPo video power rails without a separate voltage regulator in most FPV build configurations.
Key Features
- Resolution: 1200TVL horizontal resolution for high-clarity FPV racing and freestyle video output with sharp obstacle and gate definition
- Lens Options: 1.8mm and 2.1mm switchable lens configurations for field-of-view selection matched to racing course geometry and pilot preference
- Image Sensor: CMOS image sensor for standard analogue composite video output at 1200TVL resolution
- Minimum Illumination: 0.001 Lux at f1.2 for near-darkness low-light sensitivity at the upper end of analogue FPV camera performance
- D-WDR Processing: Digital Wide Dynamic Range for improved highlight and shadow detail in high-contrast outdoor racing and freestyle scenes
- 3DNR Noise Reduction: Three-dimensional digital noise reduction for clean low-light video output without the motion blur associated with 2DNR processing
- OSD Parameter Control: Internal OSD with full adjustment of exposure, gain, white balance, contrast, sharpness, saturation, noise reduction, video format, and dynamic range
- PAL and NTSC Switchable: Internal OSD video format switching between PAL and NTSC without physical modification for goggle, VTX, and DVR system compatibility
- AGC Control: Automatic Gain Control with LOW, MEDIUM, and HIGH settings for gain management in varying ambient light conditions
- Electronic Shutter Speed: PAL 1/50 to 1/100,000 and NTSC 1/60 to 1/100,000 for a wide shutter range across indoor and bright outdoor FPV flying conditions
- Signal-to-Noise Ratio: Greater than 60dB S/N ratio with AGC off for clean signal output under standard lighting conditions
- Day and Night Mode: Internal auto, colour, and black-and-white day and night mode selection via OSD for ambient light condition optimisation
- Auto Tracking White Balance: Automatic tracking white balance for consistent colour reproduction across changing ambient light conditions during flight
- Wide Input Voltage: 5-20V DC input for direct 1S to 4S LiPo video power rail connection without a separate voltage regulator
- Ultra-Compact Form Factor: 14 x 14mm PCB dimensions at 2.5g or 4g for standard nano camera bay compatibility in FPV racing and freestyle frames
- Multi-Language OSD: OSD language support in Chinese, English, German, Italian, and Russian for international FPV pilot accessibility
Applications
- FPV racing drone builds requiring a 14 x 14mm nano camera with 1200TVL resolution, 0.001 Lux low-light sensitivity, and D-WDR for high-contrast outdoor course flying
- Freestyle FPV quadrotor builds requiring 1.8mm or 2.1mm lens selection, 3DNR noise reduction, and full OSD image parameter control for varied lighting flying sessions
- Sub-250g and weight-optimised FPV racing builds requiring a 2.5g ultra-lightweight 1200TVL analogue camera in standard nano camera bay dimensions
- Indoor FPV racing venue builds requiring 0.001 Lux minimum illumination and 3DNR noise reduction for clean video output under artificial low-level lighting
- PAL and NTSC dual-standard FPV goggle and VTX setups requiring an OSD-switchable video format camera without purchasing region-specific variants
- 1S to 4S LiPo-powered FPV builds requiring a 5-20V wide-input-voltage camera without a separate video power regulator in the build.
