Description
The 4.2inch e-Paper Module (B) is an E-Ink display module that offers a 400x300 resolution. It comes with an embedded controller and utilizes the SPI interface for communication. This module is capable of displaying content in red, black, and white, allowing for versatile visual representation. Its key advantages include ultra low power consumption, a wide viewing angle, and the ability to provide clear display even without electricity. The module is specifically designed for applications such as shelf labels and industrial instruments.
Note: Please note that the raw panel of this e-Paper module requires a driver board. If you are using this e-Paper module for the first time, we highly recommend purchasing the HAT version or acquiring an additional driver hat for easy use. Alternatively, you have the option of creating the driver board yourself. The instructions provided in this document are based on the version with a PCB or driver board.
-
No backlight, keeps displaying last content for a long time even when power down
-
Ultra low power consumption, basically power is only required for refreshing
-
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
-
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
-
4.2inch e-Paper Module (B) x1
-
PH2.0 20cm 8Pin x1
External Dimension
Q: What is the resolution of this E-Ink display?
A: The resolution of the display is 400x300 pixels.
Q: What are the interfaces supported by this module?
A: The module supports SPI, I2C, and UART interfaces.
Q: Is this E-Ink display compatible with Raspberry Pi?
A: Yes, the display is compatible with Raspberry Pi. There are specific drivers and tutorials available on the Waveshare website for setting up the display with Raspberry Pi.
Q: What is the refresh rate of this display?
A: The refresh rate depends on the type of update being performed. It takes about 10 seconds for a full refresh and around 2 seconds for a partial refresh.
Q: What is the power consumption of this E-Ink display?
A: The power consumption is very low. The typical current consumption is only 15uA (microamps) when in sleep mode.
