2.13inch Passive NFC-Powered E-Paper Evaluation Kit, No Battery, Wireless Powering & Data Transfer
NFC E-Paper Eval Kit 2.13"
- 13" NFC-Powered E-Paper Evaluation Kit Comes With NFC-Powered E-Paper
- NFC Reader
- Micro SD Card
- And Essential Accessories Ready-To-Use
2.13" NFC-Powered E-Paper
- Adopts Novel Passive NFC Technology
- No Battery Required
- No More Battery Life Trouble
Wireless NFC-Powered Display Refreshing
- Passive NFC Solution
- No Battery Required
- No Messy Wiring
- Stable Operation
How It Works
To Refresh The Display Content, Use A Smart Phone With NFC Function, Or An NFC Reader, Close To The E-Paper For Both Wireless Powering And Data Transfer
NFC Board Introduction
- ST25R3911B NFC Chip
- STM32F103R Controller,
- OLED Display
- User Buttons
- And Common Used Interfaces
- STM32F103RBT6
- Core: ARM® 32-bit Cortex™-M3
- Operating Frequency: 72MHz
- Operating Voltage: 2.0V-3.6V
- Package: LQFP64
- Memories: 128kB Flash, 20kB SRAM
- Communication Interfaces: 2 x SPI, 3 x USART, 2 x I2C, 1 x CAN, 1 x USB
- AD & DA Converters: 2 x AD (12-bit, shares 16 channels)
- ST25R3911B: NFC chip, aka AS3911B
- 23LC1024: SRAM, 1Mbit
- CP2102: USB TO UART converter, for debugging
- SPX3819: 3.3V voltage regulator
- 1.3" OLED: blue display, 128×64 pixels, SH1106 driver
- 4x user buttons:
- 2x user indicators
- MCU unused pins
- USB TO UART port
- Micro SD slot
- SWD programming interface
- NFC induction coil
- UART pin configuration
RXD: connected to RXD2 by default, changeable to RXD1 via 0Ω resistor
TXD: connected to TXD2 by default, changeable to TXD1 via 0Ω resistor
Outline Dimensions
Wiki: www.waveshare.com/wiki/2.13inch_NFC-Powered_e-Paper
Package Content
- 13inch NFC-Powered e-Paper x1
- ST25R3911B NFC Board x1
- Micro SD Card 16GB x1
- Micro SD Card reader x1
- USB-A to Micro-B cable x1
FAQs:
Q: What is the refresh time for the e-Paper display?
A: The refresh time for the e-Paper display is approximately 2 seconds (excluding data transfer time). This means it takes about 2 seconds to update the content on the screen.
Q: Can I use my smartphone to refresh the content on the e-Paper display?
A: Yes, you can refresh the display content using a smartphone with NFC functionality. The kit comes with an Android app that makes refreshing the content as easy as swiping a credit card.
Q: Does this e-Paper display require a battery?
A: No, this e-Paper display uses novel passive NFC technology, eliminating the need for a battery. It receives power and data wirelessly from an NFC-enabled device or reader.
Q: What are the applications of this NFC-powered e-Paper evaluation kit?
A: This evaluation kit is ideal for developing battery-less e-Paper displays for applications like price tags, asset/equipment tags, shelf labels, and conference name tags.
Q: What is the resolution and size of the e-Paper display?
A: The e-Paper display has a resolution of 250x122 pixels and a size of 2.13 inches diagonally.
