Description
The WRL-19696 Thing Plus - DA16200 is a 802.11 a/b/g/n (Wi-Fi, WiFi, WLAN) Evaluation Board. The DA16200 module contains an 802.11b/g/n radio (PHY), a baseband processor, a media access controller (MAC), on-chip memory and a host networking application processor. The SparkFun DA16200 Thing Plus includes Qwiic and LiPo battery connectors, multiple GPIO pins, and JTAG PTH pins for debugging.
- Dialog DA16200MOD WiFi Module
- 16 Multifunctional GPIO Pins:
- Up to four 12-bit ADC channels
- Up to two UARTs
- An available SPI Bus
- An available I2C Bus
- 16 Multifunctional GPIO Pins:
- Thing Plus (or Feather) Form-Factor:
- Dimensions: 2.3" x 0.9"
- Two Mounting Holes:
- 4-40 screw compatible
- 28 PTH Pins
- USB-C Connector
- 2-pin JST Connector for a LiPo Battery (not included)
- 4-pin JST Qwiic Connector
- LEDs:
PWR- Red 3.3V power indicatorCHG- Yellow battery charging indicatorSTAT- Blue status/test LED (GPIO 4)
- Buttons:
IOC7
- JTAG/SWD PTH Pins
-
Operating voltage: 2.1V to 3.6V
-
Operating temperature: -40 to 85 C
-
Arm Cortex-M4F core w/ clock frequency of 30~160MHz
- ROM: 256kB
- SRAM: 512kB
- OTP: 2kB
- Retention SRAM: 48kB
-
WiFi processor
- IEEE 802.11b/g/n, 1x1, 20MHz channel bandwidth, 2.4GHz (up to 54 Mbps)
- IEEE 802.11s WiFi mesh
- WiFi security: WPA/WPA2-Enterprise/Personal, WPA2 SI, WPA3 SAE, and OWE
- Operating modes: Station, SoftAP, and WiFi Direct® Modes (GO, GC, GO fixed)
-
On-Chip RTC (+-250 ppm)
-
Three ultra-low power sleep modes
- Sleep current: 3.5 uA
-
RF Regulatory certifications:
-
FCC (USA), IC (Canada), CE (EU), KC (Korea), TELEC (Japan), SRRC (China)
-
FAQs:
Q: What is the SparkFun Thing Plus - DA16200?
A: It's an 802.11 a/b/g/n WiFi development board featuring the DA16200 module, ideal for IoT projects.
Q: What are the key features of the board?
A: It includes Qwiic connect system for easy sensor integration, LiPo battery connector for power, GPIO pins for various functionalities, and JTAG pins for debugging.
Q: What is the DA16200 module?
A: It's an ultra-low power WiFi module by Dialog Semiconductor, known for its multiple sleep modes for energy efficiency.
Q: What are the applications of this development board?
A: It is primarily designed for Internet of Things (IoT) projects that require WiFi connectivity, low power consumption, and easy prototyping.
Q: Where can I find more information or resources on the SparkFun Thing Plus - DA16200?
A: You can visit the official product page on SparkFun's website or refer to the DA16200 Hookup Guide for detailed information and tutorials.
