Description
The nRF52833 DK is an affordable single-board development kit for Bluetooth 5.1, Bluetooth mesh, Thread, Zigbee, 802.15.4 and 2.4 GHz proprietary applications using the nRF52833 multi-protocol SoC. The kit is compatible with the Arduino Uno Rev3 standard making it possible to use a wide range of 3rd-party shields during development, including the compatible Power Profiler Kit
from Nordic Semiconductor. The kit has access to all I/Os (42) and interfaces via connectors and there is an integrated PCB trace antenna and an RF connector for direct RF test measurements. There is also a connector for an external NFC antenna (included in kit).
- Bluetooth 5.1 multiprotocol radio
- 2 Mbps
- Long Range
- Advertising Extensions
- Channel Selection Algorithm #2 (CSA #2)
- Bluetooth mesh
- Direction Finding - IEEE 802.15.4 radio support
- Thread
- Zigbee - Arm CortexTM-M4 with FPU
- Arduino Rev3 compatible connector for use with 3rd party shields
- All I/Os and interfaces available via connectors
- Segger J-Link OB programming/debugging supported
- Support for programming/debugging of external boards
- USB interface direct to nRF52833 SoC
- USB interface to power and program/debug
- Integrated 2.4 GHz PCB antenna
- Connector for external NFC antenna (included)
- SWF connector for direct RF measurements
- Pins for power consumption measurements
- 4 x user-programmable buttons
- 4 x user-programmable LEDs
- CR2032 coin-cell battery holder
- 1.7-5.5 V supplied from battery, USB or external VDD
FAQs:
Q: What wireless protocols does the nRF52833 DK support?
A: The nRF52833 DK supports a wide range of wireless protocols, including Bluetooth 5.1, Bluetooth mesh, NFC, Thread, Zigbee, and 2.4GHz proprietary applications.
Q: Is the nRF52833 DK compatible with Arduino?
A: Yes, the nRF52833 DK is hardware compatible with the Arduino Uno Rev3 standard, allowing you to use various Arduino shields and libraries.
Q: What kind of debugging capabilities does the nRF52833 DK offer?
A: The nRF52833 DK features an on-board SEGGER J-Link debugger, enabling easy programming and debugging of the nRF52833 SoC.
Q: Can I power the nRF52833 DK with batteries?
A: Yes, the kit includes a CR2032 battery holder and a Li-Po battery connector, allowing for in-field testing and battery-powered applications.
Q: What software development tools are recommended for the nRF52833 DK?
A: The nRF52833 DK is supported by the nRF Connect SDK, which provides a comprehensive set of tools, libraries, and examples for developing applications on the nRF52833 SoC. You can also use other IDEs and toolchains compatible with the nRF52 series.
