Description
Key Features:
- Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
- Light as a feather - 4.6 grams
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 256KB of FLASH + 32KB of RAM
- No EEPROM
- 32.768 KHz crystal for clock generation & RTC
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
- PWM outputs on all pins
- 6 x 12-bit analog inputs
- 1 x 10-bit analog ouput (DAC)
- Built in 100mA lipoly charger with charging status indicator LED
- Pin #13 red LED for general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button
- 51mm x 23mm x 8mm / 2.0" x 0.9" x 0.28"
- Weight: 4.6g
Relevant Resources:
FAQs:
Q: What is the Adafruit Feather M0 Basic Proto used for?
A: The Adafruit Feather M0 Basic Proto is a versatile development board ideal for DIY electronics projects, prototyping, and creating custom embedded systems. It features the ATSAMD21 Cortex-M0+ processor for a range of applications.
Q: What are the main features of the Feather M0 Basic Proto?
A: The Feather M0 Basic Proto includes an ATSAMD21 Cortex-M0+ microcontroller, 32KB RAM, 256KB flash storage, USB connectivity, and built-in battery charging capabilities. It also has a basic prototyping area for easy circuit modifications.
Q: Does the Feather M0 Basic Proto come with a USB cable?
A: No, the Feather M0 Basic Proto does not include a USB cable. You will need a micro-USB cable to connect the board to your computer for programming and power.
Q: Can I use the Feather M0 Basic Proto with the Arduino IDE?
A: Yes, the Feather M0 Basic Proto is compatible with the Arduino IDE. You can install the Adafruit SAMD board package through the Arduino Board Manager to start programming.
Q: What types of batteries are compatible with the Feather M0 Basic Proto?
A: The Feather M0 Basic Proto supports a variety of LiPo batteries via a built-in JST connector. It can charge a 3.7V LiPo battery while connected to a USB power source.