Description
7Semi ESP32-DEVKIT-EU: Your Gateway to IoT Innovation
Fuel your Internet of Things (IoT) projects with the 7Semi ESP32-DEVKIT-UE development board. Packed with the powerful ESP32-WROOM-32UE module, this board provides the processing power, wireless capabilities, and versatile I/O you need to turn ideas into reality.
-
Robust Dual-Core ESP32 Processor: Harness the speed and efficiency of the 160MHz dual-core ESP32 processor, perfect for handling complex IoT applications.
-
Seamless WiFi and Bluetooth Integration: Effortlessly connect your projects to wireless networks and Bluetooth-enabled devices for enhanced functionality.
-
Extensive I/O Options: Explore a wide array of possibilities with the numerous pin headers, easily interfacing with sensors, actuators, displays, and more.
-
Breadboard-Friendly Design: Rapidly prototype your ideas on standard breadboards thanks to the conveniently spaced pin headers.
-
Flexible Power Supply: Choose from Micro USB, 5V, or 3.3V power options to suit your project requirements.
-
CP2102 USB-TTL Adapter: Simplify programming and debugging with the integrated USB-TTL adapter.
-
Compact & Cost-Effective: Benefit from the board's space-saving design and budget-friendly price, making it an ideal choice for hobbyists and professionals.
-
Optimal RF Performance: Get straight to application development without worrying about RF design, thanks to the ESP32-DevKit's optimized RF performance.
-
4MB Flash & IPEX Antenna: Ample storage and a high-performance antenna ensure smooth operation and reliable wireless communication.
-
All-Inclusive Support Circuitry: The board includes all necessary support circuitry, along with USB-UART bridge, reset and boot buttons, LDO regulator, and micro-USB connector.
-
Breadboard-Optimized Pinout: Easily prototype on breadboards with the optimized pinout and LDO output for powering external electronics.
|
Key Component |
Description |
|---|---|
|
ESP32-WROOM-32UE |
A module with ESP32 at its core. |
|
EN |
Reset button. |
|
Boot |
Download button. Holding down Boot and then pressing EN initiates Firmware Download mode for downloading firmware through the serial port. |
|
USB-to-UART Bridge |
Single USB-UART bridge chip provides transfer rates of up to 3 Mbps. |
|
USB-C Port |
USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-WROOM-32E module. |
|
5V Power On LED |
Turns on when the USB or an external 5V power supply is connected to the board. |
|
I/O |
Most of the pins on the ESP module are broken out to the pin headers on the board. You can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI, etc. |
ESP32 Devkit Pinouts
