Description
The DEV-20359 is Teensy 4.1 without Ethernet Development Board integrates an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip. The Teensy 4.1 is the same size and shape as the Teensy 3.6 (2.4in by 0.7in), and provides greater I/O capability, including an SD card socket, and USB host port.
Teensy 4.1 hardware and Teensyduino's software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino's extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed.
-
ARM Cortex-M7 at 600MHz
-
1024K RAM (512K is tightly coupled)
-
8 Mbyte Flash (64K reserved for recovery & EEPROM emulation)
-
USB Host Port
-
2 chips Plus Program Memory
-
55 Total I/O Pins
-
3 CAN Bus (1 with CAN FD)
-
2 I2S Digital Audio
-
1 S/PDIF Digital Audio
-
1 SDIO (4 bit) native SD
-
3 SPI, all with 16 word FIFO
-
7 Bottom SMT Pad Signals
-
8 Serial ports
-
32 general purpose DMA channels
-
35 PWM pins
-
42 Breadboard Friendly I/O
-
18 analog inputs
-
Cryptographic Acceleration
-
Random Number Generator
-
RTC for date/time
-
Programmable FlexIO
-
Pixel Processing Pipeline
-
Peripheral cross triggering
-
microSD Card Socket
-
Power On/Off management